Hi Raahul,
The IRF510 is a standard MOSFET and should work well with the bq77915. It has voltage ratings for Vgs suitable for use with such a circuit. Ciss is low so it may switch very quickly and RDSG may need to be adjusted for a desired transition…
Part Number: BQ76952 Other Parts Discussed in Thread: BQ76200 Hello,
As discussed in the original question. It was suggested to place Cgd at the common drive point, this idea works well too. But, for BQ76200 in the document SLVA729A , the engineer had…
Other Parts Discussed in Thread: CSD19536KCS , UCC27531 Hai,
I am trying to drive a separately excited motor using CSD19536KCS. My plan is to control , duty cycle of motor's armature using this circuit. Input frequency of PWM is 2.2KHz. The above mentioned…
Other Parts Discussed in Thread: CSD19536KCS Hi,
We are using CSD19536KCS MOSFET from TI in our motor control project.
It is a TO220 power MOSFET and we are using a clip to assemble it on to the heat spreader / heat sink.
Is there a TI recommended…
The problem is the Cgd capacitance.
One of your documents says :
When using a minimal number of FETs (1–2) under increased battery pack voltages, that is, 48 V, and a short circuit occurs, the CSD19536KCS FETs Cgd capacitance requires an increase…
Other Parts Discussed in Thread: CSD19536KCS , UCC25600 , TINA-TI Hello
I trying to test a designe with ucc25600 resonant controler and csd19536kcs mosfet and I need the TINA TI models please can you help. Thanks
Hello TI,
here are some waveforms:
www.dropbox.com/.../AAA8D55zyqFHfnwdJ9VK3eMOa
Channel A: HI (blue)
Channel B: LI (red)
Channel C: HB (green)
Channel D HS (yellow)
In picture setup you can see the schematic from the manual - instead of…
Hi Sandeep,
The question is more about thermal design than the FET. Many FETs will handle a high current.
Consider CSD19536KCS, It has 150A maximum current. RDSON with 10 V VGS is 2.7 mOhms. But at 100 A you will need to dissipate 27 W. It is within…
2072.LM5116_updated.TSC
Here, I have attached TINA-TI simulation file above. All the component values are chosen from this file only as mentioned in it. Also, MOSFETs used are CSD19536KCS of Texas Instrument and Diode used is BYV27-200 fast switching…
Other Parts Discussed in Thread: CSD19531Q5A , CSD19502Q5B , CSD19536KCS , TINA-TI Hi all,
I wish to use TI MOSFET models for CSD19536KCS , CSD19502Q5B, CSD19531Q5A in LTSpice.
When I try to include and run the encrypted .lib files from TI for these…
