Part Number: CSD19538Q3A Hi,
I have a question regarding the area in which a MOSFET works when it is used in ON / OFF switching.
I believe the mosfet should be used in the saturation zone when ON (therefore with with R between drain and source = RDSon…
Part Number: CSD19538Q3A Other Parts Discussed in Thread: CSD19538Q2 Hi
Are the power MOSFET's CSD19538Q3A and CSD19538Q2 AEC-Q qualified?
Regards, Markus
Part Number: CSD19538Q3A Other Parts Discussed in Thread: TINA-TI Hello,
how to create a model for the FET in the subject? I should create a macro as far as i read the thread.
How to do it?
Thanks,
Elisa
Part Number: CSD19538Q3A Hi Team,
My customer wants to know the avalanche energy rating under continuous pulse conditions.
The current data sheet specifies 8.1 mJ for a single pulse.
Is it possible to indicate the energy rating for a continuous pulse…
Hi Alev,
The breakdown voltage rating of the FET has nothing to do with the reverse current thru it. The higher breakdown voltage will protect against possible avalanche if VDS exceeds BVDSS. You can go to a 100V FET such as the CSD19538Q3A. The on resistance…
Part Number: CSD19538Q3A Other Parts Discussed in Thread: CSD19538Q2
Hi,
I want to make a constant current LED driver with a MOSFET, shunt, opamp configuratie.
The specs of the LED driver:
Frequency: ≤100 Hz
Forward current: 1 A
pulse duration: …
Hi Niklas,
I tried with RD3P050SNTL1 (100V/5A) but it is also getting over heated and there is smoke from Mosfet. I will try with a another high power mosfet CSD19538Q3A and see. In this test case, I will also increase the coupling capacitance from 100nf…
Hello Rakesh
Thank you for your support.
The waveform will be sent via private message as this is confidential customer information.
I will also briefly explain the circuit considerations along with the past E2E inquiry.
The customer was considering…
