Hi Cheah,
Again, I apologize for how long this is taking to resolve. There is no measurement of pad sizes made on the individual FET die. The solderable pad dimensions are controlled by the tolerance in the fab which is around 0.25μm. TI finds it unlikely…
Part Number: CSD23382F4 Hello:
My customer found CSD23382F4 broken after REL shock test.
The content of Shock test is to place the sample (PCBA) in the fixture and fix it. The device moves down with the fixture to give the sample (PCBA) an instant acceleration…
Part Number: CSD23382F4CSD23382F4
It seems the termination finish for this part is AuNi
Would you please provide me the max thickness of Au (Gold) in Microinches? Please also provide max thickness of Ni in Microinches.
Thank you for your continuous…
Part Number: CSD23382F4 Other Parts Discussed in Thread: BQ25120A , , CSD25484F4 Hi Team,
Can you please check battery reverse protection FET configuration.
I want to use p-channel FET as reverse battery protection.
I payed attention in the previous design…
Part Number: CSD23382F4 Hello,
My customer would like to know what the Maximum Gate-to-Source leakage for the CSD23382F4 at 4.5V so they can account for it in there design. Do we have any characterization data/value on this?
Best regards,
Errol Leon
Texas…
Other Parts Discussed in Thread: CSD23382F4 Hello to whom ito may concern. The CSD23382F4's data sheet is written like below; RG Series Gate Resistance : 350 Ω(Typ) However,it's written in Electrical Characteristics like below. In…
Part Number: CSD23381F4 Other Parts Discussed in Thread: CSD23382F4 Hi
As shown in the figure below, please help to confirm that the Gate provides 2.8v~4.2V under this condition, and Vd-0V, Vs-0V (power is off). Q9 Is the 0.56v source of Pin2 a gate protection…
Part Number: CSD23381F4 Other Parts Discussed in Thread: CSD23382F4 Hello,
I have some problems when using P-MOSFET CSD23381F4 as a switch.
I driving the gate with 2.8v~4.2V, and provide source voltage 0V(DC3VB power off), Drain voltage 0V .
At that…
This CSD23381F4 device ESD protection is unidirectional , if bi directional is a requirement then you could use the CSD23382F4 , which is pin compatible. The CSD23382F4 has lower resistance but the trade off as with any bi-directional ESD protection is…