• CSD25481F4: Are you able to join SMI/CRP programmed for this MPN ?

  

  Khor Kok Aun

  TI Thinks Resolved

  Part Number: CSD25481F4 Hi Supplier, Are you able to join SMI/CRP programmed for below part? MPN Project Part Number EAU CSD25481F4 Broadcom AVTG-1854-001007 760297

  • over 1 year ago
  • Power management
  • Power management forum
Answered

• DAC63004WCSP-EVM: Current sinking circuit with a high side P-Ch MOSFET

  

  Fearghal Rudden

  Resolved

  Part Number: DAC63004WCSP-EVM Other Parts Discussed in Thread: DAC63004W , CSD25481F4 , DAC530A2W Tool/software: I would like to implement a circuit with the DAC63004W similar to the one described in the app note SLAAE94 ( https://www.ti.com/lit/an/slaae94…

  • Resolved

  • 4 months ago
  • Data converters
  • Data converters forum

• CSD25481F4: Asking CSD25481F4 reliability report

  

  user4773221

  TI Thinks Resolved

  Part Number: CSD25481F4 Do you have CSD25481F4 reliability report? I'm not able to get from Customer support center. Thanks.

  • over 5 years ago
  • Power management
  • Power management forum
Answered

• CSD25481F4: Thermal Information (Theta JC and JB)

  

  Jejomar Ildefonso

  Resolved

  Part Number: CSD25481F4 Hello Team, Our customer is requesting for the junction-to-case (Theta JC) and junction-to-board (Theta JB) thermal resistance of CSD25481F4. Can you help us provide this information to our customer? Thanks in advance. Kind Regards…

  • Resolved

  • over 5 years ago
  • Power management
  • Power management forum

• CSD25481F4: Absolute Max Spec Vgs

  

  Steve Wenner

  TI Thinks Resolved

  Part Number: CSD25481F4 Good afternoon..... I am using the above subject in a design and I notice that the absolute Vgs spec is shown as -12V.....I also notice a "standard diode" symbol between gate and source....Typically I am used to seeing a transorb…

  • over 6 years ago
  • Power management
  • Power management forum
Answered

• CSD25481F4: BREAKDOWN VOLTAGE GATE-SOURCE

  

  Chuck Schultz

  Resolved

  Part Number: CSD25481F4 I Measured gate-source breakdown at 250 uA to be ~ 13.76 Volt. The gate rating is 12V. (a) Is the gate protection diode a zener or avalanche (low current of course) capable device ? (b) When I measure Vgs breakdown, am I measuring…

  • Resolved

  • over 6 years ago
  • Power management
  • Power management forum

• CSD25481F4: CSD25481F4 Device Marking

  

  Crosper

  Part Number: CSD25481F4 Hi, everyone, I purchased CSD25481F4 from digikey and found its device marking is "6CS". But the device marking in the datasheet is CS. Could you please tell me what is the meaning of the "6" ? Thanks!

  • over 8 years ago
  • Power management
  • Power management forum

• CSD25481F4: Gate Source Diode specifications

  

  Sumukh Pathare

  TI Thinks Resolved

  Part Number: CSD25481F4 We are using CSD25481F4 P Mosfet in our system. The design implementation that we have uses the Gate-Source diode for low currents (about 50mA or less). The datasheet does not have any specs on this diode. I would like to request…

  • over 7 years ago
  • Power management
  • Power management forum

• CSD25481F4 solder empty issue...

  

  Peter Tseng

  Other Parts Discussed in Thread: CSD25481F4 Dears, My customer design with CSD25481F4 on their system and while the SMD, there is solder empty issue! It is very critical issue since the failure rate is very high!! (27 fail / 30 total) Is there anyone…

  • over 10 years ago
  • Power management
  • Power management forum

• CSD25481F4

  

  eli

  Other Parts Discussed in Thread: CSD17381F4 1) – I saw at the datasheet that it works at -40 to 85, while we need it to work at higher temperatures of 115C. At some graphs, it seems that it works at those temperature but with few parameters changes…

  • over 11 years ago
  • Power management
  • Power management forum

Didn't find what you are looking for? Post a new question.