Part Number: CSD86311W1723 Hi TI experts,
There seems to be conflicting information between the datasheet and the WEBENCH CAD/CAE Symbols of this part. One has ABCD x 1-3, while the other has ABC x 1-4.
package information: https://www.ti.com/lit…
Part Number: CSD86311W1723 The question is about using CSD86311W1723 in a Bidirectional Power Switch as in "Figure 7. BPS Configuration – Back-to-Back Connected N-MOSFETs in Common-Source Configuration" of TI Appnote slva948.pdf for Vin in the range of…
Other Parts Discussed in Thread: CSD86311W1723CSD86311W1723 datasheet note on the top of page 2:
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling…
Thank you.
I am planning to use in common drain configuration ( CSD85302L).
What difference will it make if I use common source configuration ( CSD86311W1723)
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
Siyu,
I think the toggle flip-flop in the block diagram on page one of the spec should have let you know that the max you will get with this device is 50% duty.
Go to page 43 and 44 of the attached and select a more suitable part.
Peter,
i am enclosing the Power Management Guide for 2011. The section you will be interested in starts on page 43 and actual devices listed on page 46, With the minimum information you have given me I would expect that you will want something like…
Hi,
I've attached the 2013 User's Guide for power products. Starting on page 53 you will find a selection of PWM controllers. many of these teh frequency can be varied according to external criteria.
As an example if you use a UC3842 it is a simple…
Gary,
Most any of our power controllers with dual output capability will provide the control. See attached document starting at page 50 with the dual output controllers on page 53 and 54 and choose what features you want.
Regards,
John
