Other Parts Discussed in Thread: LMG5200 , TPS28225 , BQ500101 , CSD87334Q3D , TPS51604 Hi,
I am building a system where transistor bridge is driving a resonant load, and I am in process of selection of suitable power stage. Previously I have used LMG5200…
Hi Vincent,
Thanks for promoting TI FETs at your customer. Below is a list of all parts in the Q3D (3.3 x 3.3mm SON) package and the HBM pass voltage. The CSD87333Q3D and CSD87334Q3D include ESD protection diodes and have a much higher HBM pass voltage…
Hello Bogey,
Thanks for your interest in TI MOSFET products. I would recommend the CSD87333Q3D or CSD87334Q3D half bridge power blocks in 3x3 QFN. Both devices are designed for high duty cycle operation and use the same high side and low side FETs. The…
Part Number: CSD87381P Other Parts Discussed in Thread: CSD87333Q3D , CSD87353Q5D , CSD87334Q3D Hi everyone,
I would like to use the CSD87381P module for my motor driver application. My voltage source has 12V, my motor driver IC is DRV83053. In CSD87381P…
Hi Scott,
A couple of other options for symmetric FETs: CSD87334Q3D (3.3 x 3.3mm QFN, 30VDS, 10VGS) and CSD87353Q5D (5x6mm QFN, 30VDS and 10VGS). As with the other option, you will need to drive the gate with 8V or less.
Other Parts Discussed in Thread: CSD16321Q5 , CSD17579Q5A , CSD87353Q5D , CSD87334Q3D In the WEBENCH design I did it came up with two discrete NexFETs. If possible I would like to convert them to a NexFET PowerBlock. But looking at the PowerBlock data sheets…
1. The FET selection is depended on your solution power level. You can use CSD87334Q3D as example to check your solution.
2. Yes. The synchronous Buck Power Block can use for boost converter (Q3 and Q4).
3. Please contact NexFET group support for latest…
Part Number: CSD16407Q5
Hello E2E team
I am Customer Quality Engineer for Rochester Electronics I am trying to clarify an date code issue for our customer. The customer is questioning if this is actually a date-code 1823 as you can see in there comment…