Part Number: CSD95430 Tool/software: Dear TI Team:
We checked from CSD95430 datasheet that it is noisy, should be at least 800mil far away from Multiphase controller or other noise-sensitive device.
Due to our PCB placement is tight, and we have almost…
Part Number: CSD95430 Tool/software: Dear TI Team:
We have power stage CSD95430RRB in our design.
Checked per datasheet, it showed as below,
Is the total power loss calculated as belows contains the Inductor power loss or not?
Do we need add extra I2Rdc…
Part Number: CSD95430 Other Parts Discussed in Thread: TPS536C7 Dear TI team,
Please help confirm the power inductor(L276) and LSET resistor(R2328) selection is correct or not.Thanks
Input Voltage:12V
Output Voltage:3.3V
Maxium output current:6A
FSW: …
Part Number: CSD95430 Dear TI team,
Base ont the datasheet, all paralledled phases should have a 1K resistor from IOUT to the controller.
Question: this 1K resistor is must or not? Thanks
Part Number: TPS536C7 Other Parts Discussed in Thread: CSD95430 , Dear Team,
Could you provided simplis model of TPS536C7 & CSD95430?
Our customer need to do some system pre-simulation to check the dynamic performance.
Many Thanks,
Jimmy
Hi Akash,
Please see my feedback below:
MFR
MPN
Datasheet
Tape Width
Pitch
Pin1 orientation
MSL
Texas Instruments
TMP451AQDQFTQ1
www.ti.com/.../tmp451.pdf
See below
See below
See below
Level 1
Texas Instruments
CSD95506RZCR
www…
Part Number: TPS53688 Other Parts Discussed in Thread: CSD95430 , , TPS536C7 Tool/software: Hi,
What is the limitation of maximum current specified as 765A for TPS53688 controller. As per my understanding if we use 8xdual phases(CSD95430) of 100A each.…
Hello,
What do you mean by phase expansion? does it mean driving multi-phase by single PWM? CSD96415 does not support this feature but CSD95430 does. CSD95430 power stage features an active current balance feature which allows multiple power stages to be…
Part Number: CSD95485RWJ Other Parts Discussed in Thread: TPS53647 , CSD95430 , CSD95410RRB Hi experts
Customer is looking for a power stage to pair with TPS53647, for 80A/100A application. We proposed to use 2x CSD95485 to achieve 2-phase design instead…
Other Parts Discussed in Thread: CSD95430 , TPS536C7 Hi TI,
I wish to check, when CSD95410 is working with TPS536C7B1, does CSD95410 has internal phase shifters to delay the PWM input from TPS536C7B1 to form several phases? Or all the PWMs should come…