Part Number: DAC101C081Q
Hi Experts,
Could you please share Functional Safety FIT rate (based on IEC 62380 / ISO 26262) document?
And customer want the Mission Profile is on Motor Control of IEC 62380.
Thank you in advance.
Part Number: DAC101C081Q Other Parts Discussed in Thread: DAC121C085 Hello TI
The I2C address is very confusing: I assume that with the DAC101C081QISDX and ADR0 connected to GND, we have to use 0001101 . What is the other address 1000110 ?
Best
Part Number: DAC101C081Q Hi ~
We have a signal measure for I2C of DAC101C081QISD/NOPB. BUT it can't meet the min of tf(fall time) for DAC101C081QISD/NOPB requirement.
After we checked other parts(ex.9702) of TI, this spec can be ignored. So... Is…
Part Number: DAC101C081Q Hi,
We are powering this DAC from 3.3V and its connections is as follows:
According to the datasheet its a 10-bit DAC but actually its reaching full scale (Vout=3.3V) only when we send 0xFFF (4095). Sending 0x7FF (2047)…
Hi Richard,
As Uttam is on holiday, I thought I would clarify this issue. There are few other e2e threads about this issue:
e2e.ti.com/.../2271141
e2e.ti.com/.../540142
Essentially, there is a typo/ambiguity in regards to the second set of addresses…
Part Number: TPL0102-100 Other Parts Discussed in Thread: DAC101C081Q Hello, At fast I2C mode, my customer would like to know what could be wrong if tICF (I2C input fall time) is less than the minimum spec, 20+Cb(ns). This spec is originally specified…
