Part Number: DAC121S101QML-SP Tool/software: Hello,
Could you please confirm that :
DAC121S101QML-SP have the same masks (and fab) between DC2020, and a DC2137 ?
TL1431MJGB have the same masks (and fab) between DC1616 and DC1933 ? (should be revision…
Part Number: DAC121S101QML-SP Other Parts Discussed in Thread: DAC121S101 Hello, What are differences between DAC121S101WGRQV and DAC121S101WGRLV? DAC121S101WGRLVs pass only LDR TID test? DAC121S101WGRQVs pass only HDR TID test? No DAC121S101QML-SP passing…
Part Number: DAC121S101QML-SP Hi,
We have a design where power can be removed from the DAC121 device (off nominal case), but the SPI commands continue to be sent to the part from the controler. SPI bus voltage is nominal 3.3V. Power nominally is 3.3V…
Part Number: DAC121S101QML-SP Hello,
I am using the DAC121S101WGMPR, with a reference IC part #RH-1021-CMW-5, which provides the 5V output reference voltage connected to VA (pin 1). The reference IC is capable to providing up 10mA. The DAC SCLK is…
Part Number: DAC121S101QML-SP Other Parts Discussed in Thread: DAC121S101 Hello TI support,
In one of our space equipment application, we are using DAC121S101 at its datasheet's maximum 20MHz SCLK.
This 20MHz is generated from a 80MHz main clock …
Part Number: DAC121S101QML-SP Other Parts Discussed in Thread: LMP7704-SP Hello, for a current design we are using the DAC121S101QML-SP. Now we need to provide an output current of up to 20mA. The signal is then transmitted via a harness of 1m. At the…
Part Number: DAC121S101QML-SP Hello,
I had some questions on the DAC121S101QML-SP Gain Error.
Do you have any estimate of the error of the DAC121S101QML-SP Gain Error at End of Life (aka ageing effects, is it an extra +/- 0.1%FSR over life, +/-…
Part Number: DAC121S101QML-SP Hi team,
Is there any difference in functionalities between the DAC121S101WGMPR and the DAC IC in Evaluation Board (DAC121S101CIMK/NOPB)?
Please confirm.
