Search tips
Showing 13 results View by: Thread Post Sort by
    Answered

  • DAC122S085: Power up sequence

    Resolved
    Part Number: DAC122S085 Other Parts Discussed in Thread: DAC121C085 Hi team, We are considering a system where VREF is applied before VA. Are there any issues with this sequence? Does this device have any specific sequencing requirements? Best regards…
    • Resolved

  • DAC122S085: Initial DAC output is not 0V

    Part Number: DAC122S085 Tool/software: Hello team, My customer is observing some of DAC122S085 not outputting 0V after power on reset. Some parts output 400mV after power on reset. From the datasheet, it should output 0V after power on reset.…

  • DAC122S085: Do we have EVM & noise performance ?

    TI Thinks Resolved
    Part Number: DAC122S085 Other Parts Discussed in Thread: DAC7811 , DAC63002 Tool/software: Hi TIer Do we have DAC122S085 EVM available? Customer want to evaluate this chip for noise performance. Application is Medical - Ultrasound image - TGC…
    • Answered

  • DAC122S085: Schematic Review

    Resolved
    Part Number: DAC122S085 Hi, Please review the attached schematic. Regards, Jainendra
    • Resolved

  • DAC122S085: DAC Seems to be Resetting in Cold Temperatures

    Part Number: DAC122S085 I have a design in which I use the DAC122S085 to set the current limit for a motor drive. The design seemed to work great but I have been running into issues when testing at -40C. Basically, the DAC is commanded an output on boot…
    • Answered

  • DAC122S085: DAC122S085

    Resolved
    Part Number: DAC122S085 Hello, Our customer need the configuration of DAC122S085. Do we have the related configuration for reference? Thank you very much. Best regards Kailyn
    • Resolved

  • DAC122S085: Output noise that comes from internally

    TI Thinks Resolved
    Part Number: DAC122S085 Hi team, Does DAC122S085 have output noise that comes from itself ? According to the datasheet, it is needed to provide a noise VREF due not to have PSRR function. Thank you and best regards, Michiaki
    • Answered

  • DAC122S085: TI P-P solution to replace MCP4822T-E/MS

    Resolved
    Part Number: DAC122S085 Other Parts Discussed in Thread: DAC7562T Hi team, Please kindly suggest if we have P-P solution to replace MCP4822T-E/MS, thanks a lot! If not, please kindly suggest the best suitable solution with comparison table. thanks…
    • Resolved
    • Answered

  • DAC122S085: Distance of each Sprocket Holes

    Resolved
    Part Number: DAC122S085 Hi, Staff Distance of each Sprocket Holes DAC122S085 Data Sheet (SNAS361E) There is a figure of "QUADRANT ASSIGNMENTS FOR PIN1 ORIENTATION IN TAPE" on page24. Question: Please tell me the spacing dimension of Sprocket Holes…
    • Resolved

  • RE: TLV5618A: lower cost solutions?

    Hello Adrian, Do you know if the customer was leveraging the fast settling time option included in this device? Tightening to <3us settling time can be challenging as that is relatively quick, though a bit more practical in the 12-bit domain vs higher…

Didn't find what you are looking for? Post a new question.