Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: DAC1280 Goodmorning, I've been using an old soundcard as low frequency (below 100Hz) AWG so I removed capacitors to get DC output. Now I would like to move to a serial/USB device but current soundcards and/or USB DAC have output frequency…
Part Number: DAC1280 Other Parts Discussed in Thread: AMC1210 , , ADS1282 , DAC9881 , DAC91001 , DAC11001A
Dear sir
i am curious about how many 1's or 0's data and how long (minutes or second)
i need to send to TDATA in that i can get minimum or maximum…
Hi Tom,
I see your answer about DAC1280.
1, could you tell me the web which is create the bit stream?
2, could you send Matlab source code for me ?
my email is qgRuan@outlook.com
Thanks for you help~!
Hi Raphael,
Check out this other similar E2E thread: http://e2e.ti.com/support/data_converters/precision_data_converters/f/73/p/300939/1057291.aspx#1057291
The high frequency noise of the DAC1280 and DAC1282 is a product of the delta-sigma modulator architecture…
Other Parts Discussed in Thread: DAC1280 Hi
Our customer is planning to use DAC1280 in thier application. We are confused with the signal connection from the Controller.
As described in this E2E post , we are confused about how to generate the "SYNC" signal…
Dear Sirs,
We are going to use DAC1280 output an anolog signal (31.25Hz) to the ADS1282 for the testing purpose.
However we are not clear that how to create a bitstream TDATA for DAC1280 by miro-processor, and the format of the bitstream, such as number…
Other Parts Discussed in Thread: DAC1280 We are considering the DAC1280 for a solution where we would like to drive sinusoidal currents into a resistive sensor load.
For some sensors the current of 1.25mA woul be sufficient, but we have also loads which…
Part Number: DAC1282 Other Parts Discussed in Thread: DAC1280 Dear sir
Could you please tell as the output format of dac1282 digital mux is single bit or multi bits (please see the photo)
in that we can generate the same format for dac1280
thanks!…
Other Parts Discussed in Thread: DAC1280 , ADS1282 , AMC1301 , DAC1282 Hello,
We develop a application a high precision voltage measurement application. Goal is to measure voltage on an isolate side, to convert this value to a digital and transmit data over…
