Other Parts Discussed in Thread: DAC3152 , TRF370333 Hi there,
We are using the DAC3152 to drive a modulator (ADL5375) via a LPF. The interface between the is designed using the SLAA399 spreadsheet example to give
a DC offset at the DAC output and the modulator…
Other Parts Discussed in Thread: DAC3152 Please let me know below about the output timing of DAC3152.
--------------------------
The following is written on the 7&14th page of the datasheet.
・Ach is a rising edge of DACCLKP.
・Bch is a falling edge…
Hi Cameron,
I think he might be referring to the balun on the DAC3174. If you compare the two schematics, the DAC3174 has two transformers (one balun, one 2:1 transformer), whereas the DAC3162 has only a 2:1 transformer. The balun on the DAC3174 is essentially…
Other Parts Discussed in Thread: DAC3152EVM , DAC3152 , CDCP1803 Hi,
Just starting with basic, I am trying to generate a simple square with DAC3152EVM through TSW1400.
I am giving a data of "0000000000" and "1111111111" alternately after every 250 us.…
Other Parts Discussed in Thread: DAC3152 , CDCP1803 Hi,
Now i connect the DAC3152 to TSW1400,There is a clock generate by CDCP1803,and it used as FPGA_CLK that send to TSW1400,For example if the DAC3152 input
clock is 20MHZ,the output of FPGA_CLK is5…
Other Parts Discussed in Thread: DAC3152 Dear, Sir.
My customer is considering to apply DAC3152 to thier system, now.
Analog outpput error(min/typ/max) are not sure on its datasheet.
Could you please clarify these if you had such information.
Best Regards…
Other Parts Discussed in Thread: DAC3152 Hi:
Nowdays,I am lerning DAC3152,I know t that the requirements of dAC3152 clock frequency is 250MHZ, but at low frequencies can work it?and how low it can work.
Thanks.
Ouyang zhao
Other Parts Discussed in Thread: DAC3152 On page 15 (figure 33) of DAC3152's Data Sheet is shown clock input configuration with ECL/PECL source. Is there a scheme that shows configuration for LVDS source.
We need to do AC coupling on receiver side…
Part Number: TSW1406EVM Hello,
I'have nowe a working setup, I modify the DAC3152 board to generate trapezoidal waveform (bypassed the transformers) and it works very well.
With the HSDC I can send the pattern to the TSW1406 and it reply in loop…