Jim,
I saw that the DAC3171EVM was a current sourcing DAC.
Should I connect a resistor at the SMA port J7 to spectate voltage?
I think this output is current so that the output signal has distortion.
Finally, do TSW1400EVM & DAC3171EVM have flash memory…
Part Number: DAC3171EVM Other Parts Discussed in Thread: DAC3171 , CDCE62005
Hi,
The schematics of the DAC3171EVM show (on the top left corner following the signals DAC_DACCLKC,DAC_DACCLK,DACCLKC,DACCLKC) a circuit like this:
(this image was adapted…
Part Number: DAC3171EVM Other Parts Discussed in Thread: DAC3174 We just purchased the DAC3171EVM and want to generate a single tone but do not have the pattern generator yet. Can the EVM be setup to self generate an output signal without a pattern generator…
Part Number: TSW1400EVM Other Parts Discussed in Thread: DAC3174 , , DAC3171EVM , CDCE62005 Hello!
First of all, apologies for my bad English I hope you can understand my question :).
I have a TSW1400EVM and a DAC3171EVM. I have been working with the two…
Part Number: DAC3171EVM Other Parts Discussed in Thread: CDCE62005 , DAC3174 Hi all, I am currently running the DAC31x1EVM board. I can not operate the Ref-Clk with 500 MHz (generator max. 100 MHz). So I would like to start the VCO in the CDCE62005 and…
Part Number: DAC3171EVM Other Parts Discussed in Thread: DAC3174 , CDCE62005 , , FMC-DAC-ADAPTER Hello,
I've got some problems configuring the cdce62005 on the dac3171evm board. I'm using the provided dac3174 gui software. With that I just want to configure…
Hi Miguel
I did not see any waveforms that seemed to be a problem with the DAC3171EVM, but I checked them just in case.
I will start making a prototype from now on
Thank you
Other Parts Discussed in Thread: DAC3171EVM Hi,
I want to evaluate the DAC3171EVM using my Altera Stratix IV GX FPGA Development Kit via HSMC connections.
On the TI site it is written that one of the DAC3171EVM features is:
"Direct HSMC connection to Altera…
Part Number: DAC3174 Other Parts Discussed in Thread: DAC3171 , FMC-DAC-ADAPTER I want to test the DAC3174 device using Arria10 SoC Evaluation Board.
My plan is using the following card for testing purpose (Until we'll get the real board):
DAC3171…
Hi Jimmy,
Generally DATACLK is generated in the FPGA and sent to the DAC along with the DATA. The DATA and DATACLK will need meet setup and hold time to properly latch data in the DAC. Generally DACCLK and REF clock for the FPGA( used to drive DATACLK…