Part Number: DAC3283EVM Other Parts Discussed in Thread: DAC3283 Hi,
I am using DAC3283EVM board with ZCU 106 evaluation board with FMC connector. Though I have referred to the EVM user guide, but I am not able to configure the GUI. Can you please help…
Part Number: DAC3283EVM Other Parts Discussed in Thread: DAC3283 , DAC3282 Tool/software: I am a developing a pcb with different ADCs and the DAC3283 which will be connected to an FPGA via FMC. So far, the Abaco FMC151 was used (which uses the DAC3283…
Part Number: DAC3283EVM-SW Tool/software: Hi,
We are trying to test data through IO pattern checker. If we keep all the data '0' in the register and from the FPGA. there is showing no error in IO test results.
But if we keep data at pattern0 as 'FF…
Part Number: DAC3283EVM Other Parts Discussed in Thread: DAC3283 Hi,
1. DAC 3283 datasheet says:
So it says that maximum Input data rate is 312.5 MSPS. Does this means that Max. DATACLK frequency can be 312.5 MHz.
BUT test condition says that…
Part Number: DAC3283EVM Other Parts Discussed in Thread: DAC3283 , CDCE62005 we have Interfaced the DAC3283 with the Iwave systems FPGA. We are able to configure the CDCE with following frequencies:
DAC clk : 614 MHz
FIFO OSTR clk : 19.2 Mhz
FPGA…
Part Number: DAC3283EVM Other Parts Discussed in Thread: CDCE62005 , , TRF372017 , DAC3283 We have kept the default values in DAC3283EVM-SW which use to come after executing "Reset USB Port" and "Read All" options. After this we go to "initialize" option…
Hi Kang,
Sorry for the late update.
I found that there is USB confilict between Xiinx VC707 JTAG programmer and DAC3283EVM. When I removed the USB port connection for Xiinx VC707 JTAG programmer, DAC3283EVM works fine.
However, I have another…
Part Number: DAC3283EVM-SW Other Parts Discussed in Thread: DAC3283EVM , Hi,
I am searching for DAC3283EVM SFI control GUI installer.
But, I can't find it in DAC3283EVM-SW.
The SPI control software of Other DAC & ADC EVMs can be downloaded in…
Part Number: DAC3283EVM Other Parts Discussed in Thread: DAC3283 We are going to use DAC3283 in our product, so we brought DAC3283EVM board and one FMC-DAC-ADAPTER.
Use Xilinx standard KC705 FMC output LVDS data and clock to DAC3283.
Settings as…
Hi Dan,
Yes, I do have a DAC3283EVM Rev D. When I run the GUI as an Admin, I get a warning on device communication failure, which is interestingly recognized by Windows as DAC5688, and therefore is not recognized by the GUI for DAC3283EVM. To my surprise…
