Part Number: DAC38J82 Hello ,
I hope this finds you well,
I have been working with HSDC Pro Automation since the last week, i was wondering if there is any library call in the Automation DLL that allows me to change the mode (ADC/DAC) or close the…
Part Number: DAC38J82 What is the delay when the Coarse Fractional Delay PIR Setting is set to "100"? The data sheet shows doesn't show any coefficients for "100" in Table 17? What am I missing?
Please let me know.
Thanks, John Garrett, TI-AFA
Part Number: DAC38J82 Hello,
I hope this finds you well,
I am trying to write a Matlab GUI that talks with HSDC Pro Software using Automation DLL. I know that is the Automation is intended to work after opening the HSDC Pro and clearing any pup up…
Part Number: DAC38RF82EVM Other Parts Discussed in Thread: DAC38J82EVM , DAC38RF82 , DAC38J82 , ADC12DJ3200 Hi Hunsoo/ TI High Speed Data Converter Team,
A while back I asked a question about a one-shot trigger option for the DAC38RF82EVM, connected…
Hello Jim, thank you for your reply.
We will plan using this device with an external low jitter clock at 1.6GHz. Can you tell me phase noise of this device for using with an external clock, and phase noise for using with an internal PLL at 1.6GHz. …
Part Number: DAC38J82 I am trying to program DAC38J82 EVM via FPGA (Xilinx).
I see following for SPI access, and JP3 on EVM to be changed to FMC position
sclk : c14 sdio : c15 sdo : d14 sen_dac: d15 sen_lmk: g15
Are there any other signals needed…
Part Number: DAC38J82 I am working with the DAC38J82, and it's not clear to me how data is routed through the device. There are references to links, channels, and data paths, and it's not clear how they are all related. My assumptions are below. Please…
Part Number: DAC38J82 Hello,
Could you tell me the behavior of the SYNC signal of the DAC38J82?
I am running the DAC38J82EVM in the following environment.
<Conditions> DACCLK=230.4MHz Input Sampling Rate = 230.4MSPS Interpolation = x4 Output Sampling…
Part Number: DAC38RF82EVM Hi Ken,
Just to follow up with your comments about the one-shot trigger mode... was this feature ever implemented for the TSW14J56? I'm using this paired with a DAC38RF82EVM board, and would also like to operate the DAC in…
