Part Number: DAC38RF80 hi,all
I have some questions about DAC's link configuration:
1.This DAC support dual link mode, it means one channel is a link,another channel is another link. Does it need to the LMFS parameter is the same for each link?
…
Part Number: DAC38RF80 Dears.
We set the SPI timing as a datasheet. How do I know if SPI is working? Is there a register that can be checked?
Thank you.
Part Number: DAC38RF80 Hi TI,
We are using DAC38RF80 in our project. We have completed the design.
Now we want to do the simulation of the JESD interface between DAC and FPGA.
IBIS model of DAC38RF80 is available on DAC38RF80's TI page.
But we…
Part Number: DAC38RF80 Dears.
We are developing DAC38RF80.
In the data sheet, the VCO range is from 5.24GHz to 6.72GHz.
I want to use the VCO at 6.63552 GHz.
Is it available as specified in the datasheet?
Can I use VCO at 6.63552Ghz in DAC38RF8xEVM…
Part Number: DAC38RF80 Hello,
The currently DAC38RF80 ouptut stops when SYNCb is high. Is there a possibility to become the situation? If yes, what is it?
Before falling the condition, there are many times to re-sync happen due to error, 8b/10b error…
Part Number: DAC38RF80 Other Parts Discussed in Thread: DAC38RF82 , Hi TI,
We are using DAC38RF80 in our design.
In datasheet it is mentioned that internal balun frequency range is 700Mhz - 3800 Mhz.
So can't we use DAC38RF80 for generating frequencies…
Part Number: DAC38RF80 Other Parts Discussed in Thread: DAC38RF89
Hi TI,
We are using three DAC38RF80 in our design.We are planning to use internal PLL.
DAC has two VCOs and their ranges are:
VCO 0: 5.24Ghz - 6.72Ghz
VCO 1: 7.960Ghz - 9Ghz …
Part Number: DAC38RF80 Hi TI,
I want to use JTAG of DAC38RF80 for Eye Scan Testing , but don't have space for FT2232 on board.
DAC38RF80 is communicating to virtex-7, which in on different board, through FMC connector.
Can I connect JTAG pins of…
Part Number: DAC38RF80
Hi HighSpeed data converter team
We used DAC38RF8x-EVM for SYNC OUT +/- differential by GUI sw controlled.
If setting SLICE SYNC that didn't operate Sync signal. However If setting GPO0/1 CMOS OUT operate Sync signal.
…
Part Number: DAC38RF80 Hi HSDC team
I want to known suffix number of chip version as a below
What's the difference on suffix number?
And,
We verified operation L7 to GPO0, L6 to GPO1
So. We suggest error on 9 page of datasheet. Can you check…
