Part Number: DAC5672 Hi Team, Our customer would like to simulate the current and voltage of DAC5672 for their design. Is there any possibility to request for the available Spice model for this device for our customer? Thanks! Jonathan.
Part Number: DAC5672A Other Parts Discussed in Thread: DAC3171 Hello,
I saw this E2E post: https://e2e.ti.com/support/data-converters/f/73/t/726250 , which mentions that the DAC5672A can be used with separate AVDD and DVDD supplies. Originally I took that…
Part Number: DAC5672 Hi, i would like to know; 1)what is the maximum analog output frequency of this DAC(DAC5672) ? 2)Is a certain analog output frequency, the frequency of the generated signal? 3)Is it possible to vary the output frequency with a fpga…
Part Number: DAC5672 Hello,
When rising edge on WRT occurs, the data is latched into the internal latch register of the IC, but does the analog converted value is outgoing automatically? Or do we have to issue another rising edge on CLK to release the…
Other Parts Discussed in Thread: DAC5672 , OMAP-L138 , DAC5672A Hi,
I have a question about the DAC5672A way to work. I have a system using the DAC5672A controled by the OMAP-L138. I have to create 2 sinus in phase. I talking to the DAC5672 by the EMIFA…
Part Number: DAC5672
Hi, to separate analog and digital devices. The masterclock is situated in the digital part of the circuit with a fan-out buffer(a fan-out buffer has multiple clock ouputs to clock multiple clock inputs of different devices). So…
Part Number: DAC5672A Other Parts Discussed in Thread: DAC5672 Hello,
I want to replace, in an older design, the DAC5672 with DAC5672A.
Can you provide a list of differences?
What should I verify for?
Thank you.
Best regards,
Mircea Dabacan
Actually I have a problem:
I have ordered my PCB to a Chinese PCB manufacture, once in one of PCB modifications for the PCB manufacture, the ground plane was removed a little under LSB line of the DAC as follow
the second layer under the bus (the distance…
Part Number: DAC5672 The DAC's maximum output update rate is 275MHz MINIMUM, but the .1% settling time is 20 nanoseconds typical. This does not seem correct.
I would think that you would want a settling time much faster than that. I want to clock…
Part Number: DAC5672 Other Parts Discussed in Thread: , DAC5681 Hello support team,
I want to know the maximum junction temperature (Tjmax) of DAC5672. It is not seen in the datasheet. I'd appreciate your informing me.
Best regards, M. Tachibana