Part Number: DAC5675A Hi,
I am using the DAC5675A (5962-0720401VXC) and noticed that power dissipation is not listed in the absolute max ratings section. However, I do see a power dissipation listed in the DC Electrical Characteristics section (specifically…
Part Number: DAC5675A-SP I would like to use an ultra stable (ovenized) 1.2V reference using the EXTIO pin. I am not so clear as how to use it and bypass the inaccuracy and noise influence of the internal reference.
Part Number: DAC5675A-SP Other Parts Discussed in Thread: DAC5675A Hi,
Our electronics exhibit at least 4 components that need a power-up sequencing, including the DAC5675A-SP.
Most of the power sequencing constraints are only related to the power…
Part Number: DAC5675A-SP Hello,
We have some engineering samples that are used in our prototype. Are there any physical differences in the parts that are qualified vs. the Engineering samples? Or are the differences limited to the processes and testing…
Part Number: DAC5675A-SP Other Parts Discussed in Thread: DAC5675A Hello,
We are currently using the DAC5675A (on our prototype) and DAC5675A-SP is set to be installed on the flight model. Both of these are currently planned to be used with a Virtex…
Part Number: DAC5675A We’re doing a DPA on a 5962-0720401VXC ( DAC5675AMHFG-V ). Per MIL-STD-883, TM 2018, SEM is not required for planar die. Is the die in the 5962-0720401VXC fully planar with no oxide steps? Are chemical mechanical polish (CMP) processes…
The output voltage of the DAC must remain between 2.3V and 3.6V for an AVDD of 3.3V. The device will not operate correctly if this is not respected as the internal circuitry needs this headroom to function properly.
Thanks
Christian
Part Number: DAC5675A-SP Other Parts Discussed in Thread: DAC5675A I'd like to clarify the amplitude requirement for the clock input of the DAC5675A-SP. data sheet gives the following spec:
Is this equivalent to the following LVPECL type differential…
Part Number: DAC5675A-SP Other Parts Discussed in Thread: DAC5675 , DAC5675A , CDCLVP111-EP , SN65LVDT101 We are using the DAC5675 on a space project (LEO missions) and we are thinking about driving the clock_p and clock_n with LVDS signals generated…
