Search tips
Showing 8 results View by: Thread Post Sort by

  • DAC6571: interfacing DAC6571 using I2C

    Part Number: DAC6571 Tool/software: Hi All, I'm trying to interface the DAC6571 using I2C with nxp RT1020 imx.8 processor . I2c is configuration is like it open drain enabled and 4.7K pull up connected on SDA and SCL pin on Hardware. I confirmed…

  • DAC6571: I2C DAC6571 Driver probe issue

    Part Number: DAC6571 We are facing issues with enabling the driver for DAC6571 in our platform. In device tree file, we have added the following lines: &i2c12 { status = "okay"; dac@4c { compatible = "ti,dac6571"; reg = <0x4c…
    • Answered

  • DAC6571: could you share us the vol and voh

    Resolved
    Part Number: DAC6571 Hi Experts, May I ask if VOH and VOL specs apply to DAC6571? If yes, could you share us the vol and voh of DAC6571IDBVT for our customer? Thank you. Best regards, Gerald
    • Resolved

  • DAC6571: Readback of DAC Register

    TI Thinks Resolved
    Part Number: DAC6571 Hi TI Team, Does the DAC6571 support the ability to readback the DAC register via i2C? And if so, are there specific register addresses that need to be used to find the MSB and LSB? Thanks!
    • Answered

  • DAC6571: About device startup time

    Resolved
    Part Number: DAC6571 Hi team, It says that the power-up time is the time to recover from power-down mode. Does this mean that communication can start in the same time when the power is turned on? I would like to know how long it takes from power-on to communication…
    • Resolved
    • Answered

  • DAC6571: ESD spec

    Resolved
    Part Number: DAC6571 Hi Sir, Could you help tp provide the ESD spec of DAC6571? I could not find it on the spec. Thanks, Patrick
    • Resolved
    • Answered

  • RE: DAC6571IDBVT required data of VIH ,VIL ,VOL and VOH and also Sink and source current

    Resolved
    Hi Pooja, Thank you. I understand. I looked into the I2C standard again and the maximum VOL requirement is 0.4V (or VDD*0.2 for VDD<2V). The DAC6571 adheres to the standard so you can use 0.4V maximum VOL. Best, Katlynne Jones

  • tps54329 Dynamically Adjustable Output application question.

    Other Parts Discussed in Thread: TPS54329 , TPS62300 , DAC6571 Dear Sir Good days, We need Dynamically Adjustable Output volatge design and output range is 1.8V~3.3V 3A. we choice DC2DC is TPS54329. we have search related data in TI website. we found SLVA196…

Didn't find what you are looking for? Post a new question.