Part Number: DAC70004 Hi there,
Do these devices have internal clamp diodes on the output? I do not expect output currents of more than 10mA from the DAC and so this may be sufficient if there are internal clamp diodes to prevent the output swinging…
Part Number: DAC70004 Hi there,
Would it be acceptable to use a ferrite bead on the REFIN pin? The bead I am thinking of (BLM18KG700JH1D) has a DC resistance of max 22 milliohm. I obviously do not want to affect the reference voltage accuracy.
…
Part Number: DAC70004 Hi there,
I have a custom board design where the LDAC pin is permanently pulled down to ground. I had assumed that I could do a "software LDAC" by writing to individual channels using the command "Write to buffer n (IE D27 -…
Part Number: DAC70501 Other Parts Discussed in Thread: DAC8311 , , DAC81402 , DAC70004 Hello Team
We are looking for the DA converter which have similart spcifications to DAC70501M except that the reference mode after POR is external reference mode…
Hi Dragan,
DAC70508 , 14 bit, 8 channel - noise density 50nV/rHz @ 1kHz G=1 and internal reference
DAC70004, 14 bit , 4 channel - noise density 60nv/rHz @ 1kHz, and external reference.
TI had recently released very low noise device DACx1001 family…
