Part Number: DAC8718EVM Other Parts Discussed in Thread: DXP , DAC81408 , DAC81416 , DAC80508 , DAC8728 , DAC8718 , DAC8568 I am looking for a 16bit at least 8 channel voltage output DAC.
I want to be able to test with data in a file and stream it and maintain…
Part Number: DAC8718EVM Other Parts Discussed in Thread: DAC8718 , DXP Hi,
I am using MMB0+DXP to evaluate DAC8718. All the software-defined waveforms like sine, triangle etc., work as expected.
But, if I try using the waveform file writer, it generates a…
Part Number: DAC8718EVM Hi,
I am using DAC8718EVM. I am trying to write to DAC through SPI. I have to write gain value, input code and offset DAC code to DAC. For that, what all registers I have to use? How to configure DAC properly?
I have seen in datasheet…
Part Number: DAC8718EVM Other Parts Discussed in Thread: DAC8718 I'm looking at the DAC8718 Evaluation Board, pictured on the first page of this. What is the order for numbering the pins?
For the J1 pins on the left side, is the first row 1 and 2,…
Other Parts Discussed in Thread: DAC8718EVM , DAC8718 , DAC8534 , DXP Dear TI E2E community,
I am Donghyun Lee from Yonsei Univ. Korea.
I want to control DAC8718EVM by NI Labview in this way. Interface between PC and DAC8718EVM would be some microcontroller…
How are you currently supplying the +3.3 V and the ±12 V? On the DAC8718EVM you can supply them separately, by turning on the supplies at different times. You could use on your PCB a supply chip with an enable pin that is connected to a supply detect…
Other Parts Discussed in Thread: DAC8718EVM , DXP , DAC8718 I've purchased the DAC8718EVM and trying to evaluate by connecting it to a MMB0 motherboard using the DXP software found here http://www.ti.com/tool/dxp
However, when I open the software, I…
Hi Robert,
Attached are the Gerber files for the DAC8718EVM, the design was done using Protel 99, so we can provide you with the raw database as well if you can use that.
Other Parts Discussed in Thread: DAC8718 , DAC8718EVM Have a board that use 2 DAC8718's. They are not daisy-chained. Each has a unique chip select.
Software to set the outputs vias the SPI was created using the DAC8718EVM.
Now the development boards…