Part Number: DAC8760 Other Parts Discussed in Thread: DAC8750 , DAC8775 Hi TI Team,
As per datasheet DAC8760 the voltage and current outputs are enabled simultaneously.
But the Data resistor is common so How can we differential which data for Vout…
Part Number: DAC8760 Hi,
I am having issues when I am trying to control and communicate with the DAC8760 IC. I am trying to get the either one of the outputs to work but with no success.
Here is the initializing for the DAC:
DACx760WriteReg…
Part Number: DAC8760 Hi Team,
The datasheet has changed from Revision C to D.
I understand that there are two changes to the recommended circuit:
-Additional 100-pF capacitor from CMP to GND
-Additional 10ohm series resistor from the analog…
Part Number: DAC8760 Hi Experts,
When enabling Frame Error Checking by setting CRCEN bit to 1 of Configuration register, are all register access listed on table 18 required 24bit + 8bit CRC? Or, does only write to DAC Data register require CRC bits…
Part Number: DAC8760 Hi Support team
according to the specifications to Use 0x01 to write DAC data . Since it is 16bits resolution, I choose 0x7fff to output half level
But check that the DAC does not have a corresponding output, check that the…
Part Number: DAC8760 Hi,
We have used DAC8760 converter earlier with unipolar supply (24VDC) and it has worked well.
Now we utilize this very same circuit for another application having ±12VDC supply. Below is schematics of the design. Currently…
Part Number: DAC8760 Hi Experts,
When CRC is enabled(CRCEN = 1), what is the readback timing for Configuration register? Below is the figure for non-CRC mode. Which bit includes CRC from DAC?
Regards,
Uchikoshi
Part Number: DAC8760 Hi Support team
Does the DAC8760 input need to be isolated? If the output short circuit IC is protected? The output is connected to a positive voltage of 32V. Will the IC die?
