Other Parts Discussed in Thread: DAC902 Hi,
Our customer has a question about the DAC902.
The question is about a relation between a supply voltage (+VD) of DAC902 and the output update rate. An analog supply voltage (+VA) uses +5V.
When using the…
Part Number: DAC7811 Other Parts Discussed in Thread: OPA350 , DAC902 , DAC80501 , DAC60501 Tool/software: My team is looking to use a SPI-controlled DAC to generate 0 to 5.5V analog signals with maximum frequencies of 1-2 MHz. We think the DAC7811 fits…
Hi SI.
It is not clear to me if the EMIF will operate with DAC902. I can say that the EMIF will not operate if the DAC902 runs at its maximum frequency of 165MHz.
The theoretical maximum would be 100MHz based on the SDRAM CLK switching characteristics…
Andreas,
No. You would have to build an adapter board or a harness to interface to the two different connectors. Both headers used have male pins. Some DAC board options are the DAC900, DAC902, DAC904, DAC908, DAC5652, DAC5662, DAC5672, and DAC5671…
Andrea,
Can you verify the TSW1400EVM is getting a valid clock by sending data to one DAC902 and verify the DAC output is correct. Do this with both setups before attempting the trigger testing.
Regards,
Jim
Other Parts Discussed in Thread: THS4521 , DAC902 , TPA6211A1 Hi all,
A customer who uses THS4521 for audio amplifier application encounters some problems, the schematic in below:
Audio signal generated from DAC902, and feeds into THS4521, the output…
Other Parts Discussed in Thread: DAC902 , LMH6552 , LMH6554 I refered your tech support materials "sloa099.pdf" and "sloa054d.pdf".
I use a DAC DAC902. The output of the DAC has to goto a IQ modulator whcih needs the signal to ride on 400mv DC.
I…
Rory,
What are you interfacing the DAC to? See if the attached articles help.
Regards,
Jim
6471.DAC to Op Amp Part 2, Current-sourcing DACs slyt360.pdf 1526.DAC to Op Amp Part 3, Current-sourcing DACs slyt368.pdf DAC_Source_to_Op_Amp_Wksht_Part3…
