David,
I was able to replicate your hardware setup. While the HSDC Pro docs show TSW14J50's compatibility with your AFE, auto re-arm of the trigger is not supported in the firmware, and won't be supported in the future.
The TSW14J56EVM is compatible…
Part Number: ADC32J22 Other Parts Discussed in Thread: DATACONVERTERPRO-SW , LMK04828 , , LMK04832 , ADC32J25EVM Hi support team,
We have just bought the ADC32J32EVM and TSW14J50 data acquisition card. Here are some issues during the installation that…
Hi Mark,
I am sorry that I missed this E2E somehow.
Are you using TSW1400 to capture the LVDS data using HSDC Pro or you have your own capture solution?
If using HSDC Pro, there are a couple of examples for automation on DATACONVERTERPRO-SW Support…
Part Number: TSW14J56EVM I got the following questions from another team, and we need to know if the ADS52J90 ADC in combination with the TSW14J56 eval board and either the DATACONVERTERPRO-SW or ADCPRO is a good fit?
Measure continuously for a few…
Hi Atefeh,
Thank you for reaching out and my apologies for the delay in response.
Yes, you can access the data through MATLAB and do further post-processing.
Here is a small automation example for HSDC Pro with MATLAB https://www.ti.com/tool/DATACONVERTERPRO…
Hello Sabitha,
The only tool we have for this is HSDC Pro. This is our software suite for our evaluation modules (EVMs). You can download HSDC Pro at this link: https://www.ti.com/tool/DATACONVERTERPRO-SW
You will have to import the data as CSV by…
Hi Franziskus,
HSDC Pro can generate signal or multi-tone pattern in DAC tab of GUI.
We also have a software to generate some standard patterns (mostly wireless standard like LTE, 3G etc) on HSC Pro webpage: https://www.ti.com/tool/DATACONVERTERPRO…
Hi Mehran,
Please try to download the newest software
High Speed Data Converter pro v5
from TI website:
before loading this new software, please uninstall the older software first.
www.ti.com/.../DATACONVERTERPRO-SW
Thank you!
Have a nice…
Hi Vivek,
Our HSDC Pro software offers a way to verify that the captured data matches the analog input. First, create a .csv file that contains the digital data. Columns represent the corresponding channels. In HSDC Pro, go to ‘File’ -> ‘Import Data…
Aravind,
Try the following steps:
Uninstall HSDC Pro.
Restart the PC.
Install HSDC Pro using the link mentioned below.
Configure ADC and close the ADC GUI after configuration.
Make sure no other applications are running and Run HSDC Pro…
