Hi, My apologies for the confusion here. I'm going to attach a slightly more recent slide deck with step by step instructions to get up and running with the DCA1000EVM, could you try going through them and seeing if the configuration in the slides resolves…
Hi, Kelong:
For the feature that exceed the current package, we can not support it. Instead we provide the source code for the advanced user to figure it out themselves.
Best,
Zigang
Part Number: DCA1000EVM Hi community member,
It is occurred the following error when we try to DCA1000EVM and mmwave studio gui according to Quick Start Guide.
Please let me know the cause of this error. Do we need to install the Diamond Progrramer? If…
Part Number: AWR6843AOPEVM Other Parts Discussed in Thread: AWR1843AOPEVM , , MMWAVEICBOOST , DCA1000EVM Hi ,
customer is using an AWR1843AOPEVM together with a DCA1000 EVM to do raw data measurements via the CLI (Command Line Interface).
Customer wants…
Part Number: DCA1000EVM Other Parts Discussed in Thread: IWR1443BOOST , Dear Engineer,
I am using IWR1443BOOST+DCA1000EVM+ mmWAVestudio to capture raw data with 2 TX and 4 RX enabled. How to use 2 TX to emit Chirp alternately through MMWavestudio?
For example…
Part Number: DCA1000EVM Other Parts Discussed in Thread: IWR1443BOOST Dear Engineer,
Dear Engineer,
I'm using DCA1000EVM+IWR1443BOOST to capture the raw data, and I want to be able to get a millimeter timestamp of the first frame that DCA captured.…
Part Number: DCA1000EVM Other Parts Discussed in Thread: AWR2944 , , AWR1642 Hi,
I am working on the AWR2944 and DCA1000EVM .But I am getting error while setting up DCA1000. FPGA Version is not getting detected. I also observed that two LEDs on the ethernet…
Part Number: DCA1000EVM Dear Engineer,
I could use MMWavestudio normally on the computer I used at the beginning. However, when I changed to another computer, the same TI software was downloaded and installed on this computer, I could not use MMWavestudio…
Part Number: IWR6843ISK Other Parts Discussed in Thread: IWR1843BOOST , , DCA1000EVM Can raw data be collected from the IWR6843ISK board using the DCA1000EVM board only or do we need something else (like a boost board as used in the IWR1843BOOST board)…