Hi,
So AWR device will be continuously transmitting signal and the receiving antenna will rceive the chirp and will be send to the spectrum analyzer right?
How exactly do the setup work can you explain?
Is it possible to get the radiation pattern…
Part Number: IWR6843
Hey,
i am trying to configure the CBUFF in the IWR6843 to stream the Raw ADC Data thru the LVDS to the DCA1000 and then to the PC. It works fine by using the Mmwave Studio.
It is also working fine, when i configure a Software…
kyle,
attached, I uploaded the two conf files: the first for vital signs lab itself, and the second for the mmwave studio conf. I tried to adjust the first conf file parameters to match my implementation in mmWave Studio..
can you take a look on it…
Part Number: AWR1243BOOST Other Parts Discussed in Thread: AWR1243 , UNIFLASH
I have the same troubles as described in https://e2e.ti.com/support/sensors/f/1023/t/825105
i'm launch AWR1243BOOST with DCA1000 board. then i try to launch script: ti\mmwave_studio_02_01_01_00…
Part Number: AWR1243BOOST Hi,
I followed this thread to configure TDM MIMO, but the PostProc model just processes MIMO data separately as two 1tx-4rx radars. I am wondering if mmWave studio is able to process it as one 2tx-8rx radar?
Part Number: AWR1243BOOST Hi,
I am cascading two 1243 devices as a 4*8 MIMO radar and collecting data using DCA 1000 EVM. I followed the cascaded documentation building the hardware. Now we can get TDM data and do the range and Doppler fft. But when…
Part Number: AWR1243BOOST Other Parts Discussed in Thread: AWR1243 I am using mmwavelink_example to configure and run 1243. In my config file txPhaseShifter of rlProfileCfg_t is equal to 0 while I found this in AWR1xx_Radar_Interface_Control.pdf:
…
Part Number: IWR1443BOOST Other Parts Discussed in Thread: IWR1443 Before we buy the afformentioned board I was working with "IWR1443" ES2 and DCA1000 EVM and I flashed "xwr14xx_capture_demo_mss.bin" and "xwr12xx_xwr14xx_radarss.bin" (both from sdk 1…
Part Number: AWR1843BOOST Tool/software: TI C/C++ Compiler Can anyone help me with MATLAB code for live data processing through dca1000?
regards
ahmad!
Part Number: AWR1843BOOST Tool/software: Code Composer Studio How can i implement BPM MIMO on studio by chirps configuration. i have read various docs and threads but is it really do able on studio or not?
