Hello Andrew,
Since there is no update for 4 weeks, may I assume the issue is resolved so I can close the thread here? You can re-open it by adding a new post.
Thanks,
Youhao
Part Number: DCP010505B Hello Expert,
I need IEC Certified Report.
Because our customer has happened some issue during testing for certification.
So they have to submit IEC Certificate to certificate office.
Could you send it to me by e-mail?
michael.jeong…
Part Number: DCP010505B
Dear team,
The customer are trying to add bead at input line like below for solving EMC issue(CE). Please review below concept/layout and let me know your opinion regarding side effect.
Thank you.
Part Number: DCP010505B I noticed on the REV H datasheet, that there is no reference to the UL1950 Testing conducted on the part. It only mentions the 1KVrms for 1-second flash test and the maximum continuous working voltage across the isolation barrier…
Part Number: DCP010505B I've noticed in other DCP01 series datasheets - specifically the DCP0124 datasheet (attached) from Burr-Brown listed the 1KV isolation as being based on "life-test data". Is the reason for the 1KV continuous isolation…
Part Number: DCP010505B Understand that the DCP01 Series is good for 1KVrms for up to 60 seconds per the UL1950 test only. However, is the reason behind the continuous voltage change to 60VDC across the barrier due to the fact that life testing is no…
Part Number: DCP010505B Hello expert,
Customer would like to replace MINMAX MAU202 with TI solution. May I know if DCP010505B is okay for them? Or do you have more suitable solution could share with us? Thanks a lot!!
Best regards,
Ann Lien
Part Number: DCP010505B Other Parts Discussed in Thread: DCPA10505 HI sir:
When i use the DCP010505B for a 60ma load. i find that when I start up .i will be have a big current. And about 5s later it will be normal. I use it refrence the datasheet.