Part Number: DCP020515D Other Parts Discussed in Thread: ASH Tool/software: Hi Forum,
I am using the DCP020515DU part in one of my designs. I have followed the typical application listed in document SBVS011N – MARCH 2000 – REVISED APRIL 2020…
Part Number: DCP020515D Dear TI's team or others
I would like to know the date that the trials have been performed in a qualification summary.
I would need this information in order to know if I have to perform LAT on the parts procured or not.
Many…
Part Number: DCP020515D Hi,
the DCP02 series dc-dc-converter has several pins marked as NC (not connected) in the datasheet. Does NC mean, that they are not internally bonded to anything and it is safe to connect those pins with adjacent pins ? E.g. in…
Part Number: DCP020515D Hi,
Good Day.
Customer is using this device, input 05 dual outputs +/- 15V. They want to connect them in parallel, however in the datasheet, it is stated that it is possible for single-output voltage devices.
Is there any method…
Part Number: DCP020515D Hi I found an application note sbaa035b in which it is decsribed how to control the Sync Pin to enable/disable the DC/DC Converter.
I have 3 DCP02 in my circuit and I control it with one transistor. Is this OK?
What if I measure…
Part Number: DCP020515D Hello,
the DCP020515D datasheet states a max device output current of 133mA (IOUT1 + IOUT2). Is there an additional restriction of keeping the output current at max 66mA per channel? Or would it be fine to use 100mA on one channel…
Part Number: DCP020515D The Device Comparison table (p. 3) of the datasheet lists "Load Regulation 10% to 100% Load" for the '0515D as 11 typical / 20 max, with a note that this value is "Load regulation = (VOUT at 10% load – VOUT at 100%)/VOUT at 75…
Part Number: DAC7716 Other Parts Discussed in Thread: DCP020515D , , REF5050 , ADS8883 , OPA4990 , DAC8234 , DAC8734 , PGA855
Tool/software:
Hello,
I am using two DAC7716 on our board and they are being powered by a DCP020515D part. Through testing at around…
Part Number: DCP020515D Dear TI
I find Wrong Diagram in datasheet of DCP02.
You can find Wrong Diode direction in dual output block diagram.
Best regards,
Choi
Part Number: DCP020515D
Dear TI
The dcp02 datasheet contains incorrect information(secondary diode direction in push-pull power stage).
In the past, I requested correction for incorrect information. It has not been modified yet.
TI would like to review…
