Part Number: DCP021212 Tool/software:
The following are the appearance differences of the DCP021212U/1K chip. Please help confirm that there are differences in the surface appearance When comparing the first and second pictures, the second one shows…
Part Number: DCP021212 could you please be more specific regards your answer?
what is the first digit means?
what is the second digit means?
please add some examples
i have two 2nd lines:
the first has 2nd line code: 11Z264H.
the second has…
Part Number: DCP021212 Other Parts Discussed in Thread: LMR43610 We're looking to generate -19v from a +12v input with 100mA output load.
We current use the DCP021212DU which outputs +/-12v (we tie +VOUT to system Ground, and -VOUT is the negative output…
Part Number: DCP021212 Hello all
i got IC DCP021212U with the 2nd line marking different,
the first IC has 2nd line code: 11Z264H.
the seconnd IC has 2nd line code: 2AZ648H.
can any one knows what is the meaning?
Zvi Sade
zvi_s@atct.co…
Part Number: DCP021212 Hi Team,
The DCP021212 is rated for 42.4Vac/60V DC in normal operation, and the datasheet mentions higher voltages as being allowed but regarded as "unsafe". Ignoring user-accessibility/safety, what would be the max continuous…
Part Number: DCP021212 Hello everyone！ I am using the chip DCP0212 as a power isolation circuit！The output voltage of this isolation circuit should be 12V and 5V.
Now I measure the 13 pins of U5, its output voltage is 22.01V ; the 13 pins of U6, its…
Part Number: DCP021212 Hi,
I received the following question from my customer.
The customer is supposing to restrict the input current of the DCP021212 because they must cut down power consumption.
Is such usage allowed if they allow dropping the…
Other Parts Discussed in Thread: DCP021212 I need to isolate three ground planes for three BMS ICs to monitor/active balance 18 cells. Vsup for the BMS IC needs to be 6-32V. The BMS does not draw power from the battery, a very important issue. The BMS…
Other Parts Discussed in Thread: DCP021212 Hi,
i am using DCP021212P part in isolated power supply application, its preset output voltage 12V but when i power up with 12VDC its output voltage is 24Volts i am not able to find the Reason for this. …
Other Parts Discussed in Thread: DCP021212 I have built several prototypes of a system where the current sensing and mosfet switching is floating above the load, and the load is tied to ground, in a 14VDC system. The DCP021212 randomly takes from 0 to…
