Search tips
Showing 2,921 results View by: Thread Post Sort by
    Answered

  • Source code for "USB Interface Adapter EVM"

    Resolved
    Hi, Is it possible to get the source code of the C# projects "USB Interface Adapter GUI-v1.10" and "PMBus Reference GUI" that are downloadable from the "USB Interface Adapter EVM" product page? Best regards, Benjamin Pru…
    • Resolved

  • RE: TMDS64GPEVM: How to disable i2c bus devices?

    Hello Jakub, 1) Please attach the snippet of your devicetree where you disable the i2c instances in your board-level dts file so i can check. 2) What do you see when you do i2cdetect -y -r <bus_number>? Does it align with your expectations? e.g…
    • Answered

  • DAC34H84EVM: Is a DAC34H84 EVM(Rev D) compatible mechanically with FMC-DAC adapter?

    Resolved
    Part Number: DAC34H84EVM Other Parts Discussed in Thread: DAC34H84 The module, I bought( DAC34H84 EVM(Rev D), is not compatible mechanically with FMC-DAC adapter. It is impossible to connect boards to each other. Are there many versions of the FMC-DAC…
    • Resolved
    • Answered

  • RE: OPA1679: Evaluation

    Resolved
    Hello Hayashi, The DIP adapter board you found is all that we have available for the OPA1679. Best Regards, Chris Featherstone

  • AM3358: Booting AM335x-GP-EVM on NFS

    Part Number: AM3358 Please find attached the configuration i have set to enable AM335x-GP-EVM to boot on NFS I am facing very first hurdle wherein i am not seeing BOOTP packets coming (Have wireshark connected) I have another custom hardware which is…

  • TPS6594EVM: TPS65941212:I2C communication

    TI Thinks Resolved
    Part Number: TPS6594EVM Other Parts Discussed in Thread: TPS6594-Q1 Hello I wanted to establish an I2C communication between PMIC(TPS6594-Q1) on TPS65941212EVM board and host PC using I/O USB Interface Adapter. I have connected 6th pin of USB Adapter to…

  • RE: DUAL-DIYAMP-EVM: Which package can be assembled to DUAL-DIYAMP-EVM?

    Hello Kazuya, Kazuya Nakai59 said: Q1. Can VSSOP8pin package be assembled to the EVM? No, the DUAL-DIYAMP-EVM is only compatible with SOIC-8 package amplifiers. I recommend the customer sample TLV9052 in SOIC-8 package for the EVM, and design with VSSOP…
    • Answered

  • UCD9080: UCD9080 GUI not working

    Resolved
    Part Number: UCD9080 Hello, We have a UCD9080 PMIC in our design and we are trying to program it with the UCD9080 EVM GUI-2.3 (Rev. A) provided by TI and the USB-GPIO 2006 adapter but it seems that the software doesnt recognize the adapter. We have tried…
    • Resolved

  • RE: USB-PD-CHG-EVM-01: Error at connection

    Hi Hiyashi-san, Both sequences should work, but if Windows is not recognizing Aardvark I would recommend using the first sequence. Make sure to add the Aardvark adapter in Flash Center -> Adapters -> Add Adapters. Once the adapter is added, set the "Device…

  • RE: TPSM84A21: Low Frequency Ripple

    Hi Hirotsugu, This is the bode plot from the TPS54A20 EVM: As you can notice the phase is not dipping below 15 degrees. The lower is the dip the higher are the chances that the ripple shows up. The plots you have attached, specially the 0.85V one, seem…

Didn't find what you are looking for? Post a new question.