Hi Pradeepa,
Can you include a screenshot of the "UNKNOWN STATE" error you see? Have you followed the instructions in the CC3100 & STM32F4 bringup guide?
4606.CC3100 & STM32F4 Bringup Guide.pdf
Thanks, Jacob
Hi Arun,
I believe your pin configuration is correct. Do you see any data being sent on the RX and TX lines between the devices?
Here are some other debug steps from the CC3100 User's Guide :
1. Have you added the SL_IF_TYPE_UART define in user…
Hello Tiago,
Yes, data would be organized into the same packet structure as the OOB demo, as long as same binary used in the mmWave sensor.
One our colleague suggested to look at below adapter, I haven't tried this board. But thought, would be a…
Dear Wang Jin -
please see www.ti.com/.../discovery-adapt and the download link for the code reference for the STM devices here www.ti.com/.../discovery-adapt
Part Number: BOOSTXL-CC3135 Other Parts Discussed in Thread: CC3100 , CC3100SDK , CC3135 Hi E2E,
I am testing BOOSTXL-CC3135 connected with STM32F4-Discovery.
Hardware : STM32F4 Discovery board + BOOSTXL-CC3135 and CC31XXEMUBOOST
Software : STM32F4_Add_On_for_CC3100_SDK…
Sid -
have you considered to leverage the board we made available for such non-TI MCUs, for the BoosterPack interface?
www.ti.com/.../discovery-adapt
in case you have some breadboard issues, maybe this would be useful/stable platform for you.
Dear Gautam -
On page 56 here ==> you will find at the bottom left of the schematic the pinout for the EM headers on that MSP430 EVM.
the signal lines all have 0 Ohm resistors connected - if i may suggest, you could get the EM to BoosterPack Header…
Hi Pawel, SFlash is mandatory for function of CC3120 or CC3100 device. At least you should have uploaded ServicePack inside flash. CC3120 have own fimrware in ROM and ServicePack contains patches for this fw. Content of sFlash can be uploaded by Uniflash…
Hi Daveon,
I've received a TLV320ADC6140 from Proto Advantage on one of their adapters and I'm attempting to begin the series of experiment you requested today.
Right away I ran into a bit of a snag/issue that I don't quite understand. It had occurred…
