Other Parts Discussed in Thread: DLP4500 , DLPC350 Hi,
I am working on a research project and looking for the right DLP projector for an Automotive HUD solution. There was a white paper https://www.ti.com/seclit/wp/dlpa057/dlpa057.pd f published sometime…
Hi Shersingh, Sorry for the wait! Here is s preliminary design tool that will aid you in calculating component values. Keep in mind, this is a preliminary calculator and has not yet been thoroughly evaluating, so please verify the values by hand. Hope this…
Part Number: DLP3030-Q1 Hello Team,
We are developing HUD product using DLP3030 and we need to implement LED over voltage over current protection mechanism in our software. As per the below thread, it seems LED current and voltage cannot be read properly…
Hi John,
1, 230NPEVM can be increased from 100 lumens to 350 lumens.
https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/1108090/dlpdlcr230npevm-increasing-the-luminosity-from-100---350-lumens?tisearch=e2e-sitesearch&keymatch=DLPDLCR230NPEVM…
Other Parts Discussed in Thread: TEST2 I am currently using DLP ® LightCrafter The Display 3310 EVM kit encountered two issues during use:
1. I set the lumen value through the tool DLP-LightCrafter Display GUI Installer v7.4. After successful writing…
Part Number: DLPC120-Q1 Hi Experts !
Customer using our DLP solution into their AR-HUD product, architecture is: SOC(Quallcomm 8155) -> TI Serializer(DS90UB941Q1)-> TI Deserializer (DS90UB928Q1)->DLPC120
Now the issue is DLP HUD can't show image…
Part Number: DLPC230-Q1 Other Parts Discussed in Thread: DLP5530PGUQ1EVM As shown in https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/1077842/faq-dlpc230-q1-dlp-auto-hud-gen-2-resources-and-documentation : t o control the EVM and general…
Hello -
Please refer to this page for details on the calibration routine: https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/1077842/faq-dlpc230-q1-dlp-auto-hud-gen-2-resources-and-documentation/3989125#3989125
Once you have a setup…
Part Number: DLPDLCR4710EVM-G2 DLP LightCrafter Display 4710 EVM few questions in regards to this module:
DMD output brightness is 600 lumen (as specified in User guide) or 1000 lumen ? How is the test following ? Is this test following a norm ?
Field…
