Helllo Ekagra,
Ekagra Gupta said: 1. Can I use DLPDLCR2000EVM without buying BBB board?
You can use the DLPDLCR2000EVM without BBB board. It will display the splash screen loaded in the flash upon power up. However ,to display your content to need drive…
Part Number: DLPDLCR4710EVM-G2 Other Parts Discussed in Thread: DLPDLCR471TPEVM , , DLP-OMM-SEARCH Tool/software: Hello,
could you share the zemax blackbox design files for the projection optics of DLPDLCR4710EVM-G2 (Young optics) and DLPDLCR471TPEVM (Anhua…
Hi Meenakshi,
You can contact our third party optical engine manufactory to get more details about the BOM. You can use DLP-OMM-SEARCH tool to search the contact information.
Please refer to this E2E forum for the two types of calibration: https://e2e…
Hello again Nigel,
The DLPC900 is a video chip with special firmware that supports structured light and other industrial applications. The controller has a DRAM to hold about 400 binary patterns and can store more patterns in flash memory to display directly…
Part Number: DLP9000XUV Other Parts Discussed in Thread: DLPC910 , DLPLCR90XUVEVM , , DLPC900 , DLP9000 , DLPLCRC910EVM Tool/software: Hello E2E Experts,
Good day.
I have recently purchased a DLP9000XUV DMD hosted by a DLPLCR90XUVEVM evaluation module for…
Hello Cheng,
I would request you to please refer to OMM Search Tool ( https://www.ti.com/tool/DLP-OMM-SEARCH) to find the relevant thrid party contacts that can help you with your query.
Regards,
Mayank
Hello Abdul,
Yes , it can if optical engine is designed to do so. These are design parameters for the optical engine.
Please download the optical module search tool from the following link.
DLP-OMM-SEARCH Optical module | TI.com
Please review it and try…
Hello Taka,
I hope you had a good weekend.
Q1
Is there an optimal optical calculation software that can be used to model "this really needs an optical engineer to model the system to be sure"? Currently I am using "ZEMAX Optic Studio". Can this software…
Yoshitaka-san,
Sorry for the long delay, I was out of pocket for the Thanksgiving holidays and weekend here.
I am assuming that you are designing your own mounts and optical system.
Think of the one surface as parallel to the windows. it can be rotated…
Gyuin,
You will need to design a mount with 4 holes and springs rather than two. You will need to adjust the spring forces (constants) so the total force on the DMD datum and thermal interface meet the nominal values in the data sheet and do not exceed…