Hello Renan,
TI doesn't own the Optical Engine design and this will usually be owned the the manufacturer themselves.
I recommend this tool that we have to find OE manufacturers, https://www.ti.com/tool/DLP-OMM-SEARCH .
AnHua Optoelectronics will…
Alex,
Thanks for the additional information. I would recommend you to reach out to Young Optics for the required support here. You can find their contact details via https://www.ti.com/tool/DLP-OMM-SEARCH tool.
Regards,
Mayank
Part Number: DLPLCR65NEVM Other Parts Discussed in Thread: DLP650LNIR , DLPC410 , DLP-OMM-SEARCH Hi Team,
We have received this inquiry from our customer.
In my case, I want to modulate the input light in amplitude at 1550nm, but I am wondering whether…
Hello Luis,
Since the offset setting is a designed parameter of the optical module, it can not be changed. For your use case, you will need a 0% offset optical engine. You can use DLP-OMM-SEARCH tool to find the optical that meet your requirement. …
Gyuin,
You will need to design a mount with 4 holes and springs rather than two. You will need to adjust the spring forces (constants) so the total force on the DMD datum and thermal interface meet the nominal values in the data sheet and do not exceed…
Hi Matthew,
Most of the customers usually by the optical engine from manufactures which comes with the DMD itself. Then they design their own custom board with Host MCU of their choice, PMIC and DMD Controller.
We do not have any demo boards other…
Hello Catherine,
We need a little bit more information about the optical system and illumination. F#, wavelength, power density.
For refocusing the mirrors on to another surface thre are several options. Offset optics or Scheimpflug can be used depending…
Hello Taka,
I hope you had a good weekend.
Q1
Is there an optimal optical calculation software that can be used to model "this really needs an optical engineer to model the system to be sure"? Currently I am using "ZEMAX Optic Studio". Can this…
Hello Eric,
Thank you for your your patience. The chipset from the "Advance Light Control Portfolio " especially the chipset designed for 3D scan and machine vision are best suited for your application:
Visible products (420 to 700 nm) product selection…
Jeff,
The 230NPEVM was designed as a reference design for evaluation purpose to showcase how small the form factor capability and hence it is not capable of achieving the maximum specified brightness.
You can increase the lumen output (up to the range…
