Other Parts Discussed in Thread: DLPC2607 , DLPC300 hi,
In "DLP® Technology and Products" sheet there is two DLP3000.One is controlled by DLPC2607 an the other is controlled by DLPC300.My quenstions is that the two DLP3000s are the same,or can i use…
Other Parts Discussed in Thread: DLPC300 Hi,
I would like to reconfigure the FPGA on the LightCrafter EVM (DLP3000). Does anyone know how to do it? It's said you can program via the DM365 on board, but I don't see any documentation in details. I would…
Part Number: DLPC1438 Other Parts Discussed in Thread: DLPA2005 , , DLP300S Hello,
I'm trying to make sense of the DLPC1438 way of controlling the light which uses dark frames and exposure frames and in general of the DLPC1438 + DLP300S + DLPA2005 combination…
Hello SungHyun,
If I understand correctly, you are looking for an alternate LED driver chip. I am a little confused. Are you working with the DLPC350 / DLP4500 chipset or the DLP300 / DLP3000 chipset?
It would have to be one that the DLPC300 can communicate…
Part Number: DLPC1438 Other Parts Discussed in Thread: DLP300S , DLP301S In section 3.3.2 3D Print Procedure With FPGA Front-End (Page 33) step 4, the guide states that SPI images are sent into non-active buffer
But, in section 3.3.12 Write Active…
Part Number: DLP9500UV Other Parts Discussed in Thread: DLPC410 , , DLP9500 , DLP500YX , DLP300S Hi Team, May I ask for help? Our customer have a concern as shown below: " I want to customize two light projector, here ask for your assistance. I am looking…
Hello Marvin,
Welcome to DLP forum and thank you for your interest in DLP technology. TI has "end of life" DLP300 DMD and no new design is recommend with this chipset combination.
DLPC3470 along with DLP2010LC DMD is replacement chipset .
https…
Hello Justin,
Removing the mirrors and changing the coating on the mirrors is not something that we typically support. This may be possible without damaging the DMD, but we cannot recommend doing so.
You may consider our DLP300s DMD since it is designed…
Hi,
I have set a stored pattern sequence as default on the LightCrafter, which is set to auto input trigger. How can I make the LightCrafter start this pattern directly after the boot sequence has finished?
Do I need to modify the MSP430 source code…
