Part Number: DLP3000 Hello all,
I have been having a problem recently with my DLP300 DMD being stuck in the boot screen. This issue seems to be sporadic and I am unsure how I can fix this issue. To note what I am trying to do here: I have configured…
Hello Sanjeev:
Nice to see your response.
We can do your #1, but can you give us some documents for the APIs? We need your suggestion.
We had to capture the images, filter them, and write into DLP300 port via DM365.
Please give us your access…
Other Parts Discussed in Thread: DLP7000 , DLP9000 Hi,
My application is on time-of-flight depth measurements. I am using the DLP300 with LED removed and using a modulated laser diode instead. When projecting binary patterns (1-bit) such as checkerboard…
Thank for your reply。
I have removed the light engine. I think it is OK to connect the DLP by GUI. But it has a problem as the figure.
But I can not upgrade the DLP300.
I think I use the correct its for DLP 300 as the figure.
But it failed…
Hi,
I would like to utilize the LightCrafter EVM (DLP300) to achieve a custom design. I would like to know how can I start programming the DLPC300 and the MSP430. I get some open source firmware from the TI website, and we can update the firmware through…
Hi Sanjeev,
after investigating further into 8 bit monochrome projection via HDMI, I discovered the following peculiarity:
Selecting 8-bit 45Hz monochrome HDMI mode result in an unexpected trigger output. I do not know about the exposure pattern,…
AM,
The reason for this is the difference in packages. The DLP7000 and DLP9500 are Type A packages, and these have been well characterized for illumination power density - as stated in their respective data sheets. These packages have substantial metal…
Hi,
I am using DLP Lightcrafter for some of my small applications. For my new portable application I need to cut down the size of it. So,I am trying to use the DLP300 chip alone along with some controller (and power+optics also). As specified in the…
Dear Baoquing,
Are you trying to update the each bit-plane individually?
Perhaps you have tried - the C200 of the DLP300 accepts 24-bits input. As Pascal noted, you can render the 24-bits as individual bit-planes. The fundamental limitation is that…
Well, I downloaded "DLP300-C200REFDM365: Embedded Linux MicroSD 4GB Image For DM 365", there is a DLP3000-C300REFDM365.bin image (4,4Mb) image file. How can I flash in on sd card? I tryed to use dd command, but it's not work.
We need to make Lightcrafter…
