Part Number: DLP3030-Q1 In the DLP3030 specification，it Supports WVGA (864 × 480) resolution ； The physical number of micromirrors is 683*608=415264 micromirrors; What is the relationship between the WVGA (864 × 480) resolution supported by DLP3030…
Part Number: DLP3030-Q1 Dears,
I have some questions about Photodiode selection
1. Are there specs on Photodiode? Are there selected criteria and conditions?
2. Is there any restriction on the placement of Photodiode in the optical machine (where can it…
Part Number: DLP3030-Q1 HI :
I have two questions，please help to check.
1. Reference design page NO.Q3 PMOS SQD50P06-15L-GE3,ID=50A, this material is difficult to buy, why use such a large current PMOS ? According to the "dlpa084" document, the maximum…
Part Number: DLP3030-Q1 Hello, I would love to see pictures of installation in the car, how big is projector, what do we need to install it in our cars, whats are requirements and possibilities of this technology? Thank you for your comments.
Part Number: DLP3030-Q1 HI :
Is it OK to connect the SPI interface of TMS320F28023 to the main control MCU? What specific operations can the main control MCU do to the TMS320F28023 through the SPI interface?
The SPI interface of the DLPC120 and the SPI…
Part Number: DLP3030-Q1 HI，
What is the main function of TPS3808G01Q1 in the reference design? When monitoring the P12V network power supply voltage is lower than 5.557V, pull down the PWRGOOD pin of DLPC12 to power off the DMD chip to protect the…
Part Number: DLPC120-Q1 Hello Team, Could you please help to share the display timing parameters of DLP3030? I have seen that from DLPC120 data sheet, but still some of the information are missing. Its mentioned only Minimum Values, what about the maximum…
Part Number: DLP3030-Q1 Hi
I want to use the difference of DLP3030-Q1 Electronics Evaluation Module/ DLP3030-Q1 Picture Generation Uni t /DLP3030-Q1 Combiner HUD Tabletop Demonstrator
BR
William
For this change, please verify the signal integrity of the DMD clock and SAC_CLK at the pins of the DMD. Are the setup and hold times still met correctly?
https://www.ti.com/lit/ds/symlink/dlp3030-q1.pdf - See table 6.7 in the DMD datasheet. Are the signals…
Part Number: DLP3030-Q1 Hello Guys,
Good day!
Our customer are creating an HUD for safety critical application and is planning to use DLP3030AFYJQ1. Is there any FMEA, Possible errors, occurence and detection rate; parameters in our diagnostic output that…
