Hi Archie,
Unfortunately there is no software or tool that can recover this DMD. The sudden loss of power caused a failure where the mirror's hinge has been damaged beyond use.
Regards,
Austin
Part Number: DLP3310 Other Parts Discussed in Thread: DLPDLCR3310EVM , , DLPDLCR230NPEVM , DLP230NP Hi Team,
I wanted to ask if DLPDLCR3310EVM and DLPDLCR230NPEVM can be used for augmented reality. both DMDs and the DLP3310 and DLP230N are pico devices however…
Part Number: DLP3310 Document DLPS124C, page 16, figure 6-14 appears to show that test pad B17 is solidly within, and pads A17,A18,B8,B18, and C8 are partially within the Thermal Interface Area, where a presumably conductive heat sink will be in contact…
Part Number: DLP3310 Other Parts Discussed in Thread: DLP4710 , Does the DMD require an Interposer, or can it be directly soldered to a PCB? I understand the desire to, in effect, socket an expensive component, but in my application I would prefer to mount…
Part Number: DLP3310 Other Parts Discussed in Thread: DLPC3437 , DLPDLCR3310EVM , DLP3010 , , DLP4710 The device datasheet specifies a mirror array of 1368x768 pixels, and in other messages in the forum it is stated that each mirror is used to display two…
Part Number: DLP3310 Other Parts Discussed in Thread: DLP3010EVM-LC , , DLPDLCR3310EVM Hello,
Can we use DLPLC3310EVM for 3D structured light applications? It is not labeled as "-LC" (Light Control) but as "display". Our application requires funcions such…
Part Number: DLP3310 Other Parts Discussed in Thread: DLP9500 , , DLP471TP , DLP4710 , DLP7000 Hi Team,
Our customer is looking for a DLP with resolution at or higher than 1024x768, that can flip mirrors given a pre-loaded binary pattern at 44 microseconds…
Hi Brain,
Unfortunately no, the DLPC3439 will only work with DLP4710 DMD.
with DLP3310 you can use 720p @ 120 Hz or 1080p @ 60 Hz with XPR/Actuator.
the DLP4710 Optical engine may actually be smaller than the DLP3310 due to the 3310 requiring actuator…
Part Number: DLP3310 Dear TI team,
We are developing a new product and need a short range, approx 300 lumen brightness, 0.3 throw ratio, compact projection engine. Your choice is huge and maybe there is the possibility to find the right unit or a combination…
Part Number: DLP3310 Hi Forum!
We are in early stages of designing a projection system using the DLP3310 and looking to integrate the wireless AV reception capability to the existing design along with the wired HDMI available on the DLP EVM module.
What…