Part Number: DLP4500 When the DMD is removed from the DLP4500, you will see two LEDs near the DMD, one green and one red, when the power is turned on. When correct, the LED is green, but does this mean that the LED is red when the DMD is not recognized…
Part Number: DLP4500 I have a new question.
When I irradiate laser beam, the reflection beam spread in a strange way.
Is that OK? Then, the surface of DMD is no matter. If the surface image change, the
spread direction is not changed. Please see the picture…
Part Number: DLP4500 Hello.
The DMD is no longer functioning. The voltage of the power supply is correctly input.
I thought the DMD was broken, so I installed a new DMD, but it does not work.
Please look at the images. If normal, the first green LED should…
Part Number: DLP4500 Hello.
The DMD is no longer functioning. The voltage of the power supply is correctly input.
I thought the DMD was broken, so I installed a new DMD, but it does not work.
Please look at the images. If normal, the first green LED should…
Hello ,
?? ?? said: Are flex cables general-purpose?
The flex cable is custom built and are specific to an optical engine. It is supplied by the optical engine manufacturer along with optical engine. The TI EVM sources optical engine from external manufacture…
Part Number: DLP4500 When the DMD is removed from the DLP4500, you will see two LEDs near the DMD, one green and one red, when the power is turned on. When correct, the LED is green, but does this mean that the LED is red when the DMD is not recognized…
Part Number: DLP4500 Please watch the picture.
I have some questins.
1,How should I mount the DMD horizontally?
2,When I mount DMD, which type of adhesive can I use?
I now have a heat sink on the back of the DMD.
If you have Something that can be mounted…
Part Number: DLPC350 Other Parts Discussed in Thread: DLP4500 , , DLPLCR4500EVM Hi everyone,
I wondering how long could be the data lines between a DLPC350 and the DLP4500?
TI development kit called DLPLCR4500EVM Lightcrafter is a stacking between two…
Part Number: DLP4500 can we operate dlp4500 without using its module or controller. Or can we use fpga instead of the EVM. we just need to change the angle of dlp. AS we are using it for surface profiling.
