Search tips
Showing 76 results View by: Thread Post Sort by
    Answered

  • DLP4500-C350REF: about the NC data(Drill data) and NC list(Drill list)

    Resolved
    Part Number: DLP4500-C350REF Other Parts Discussed in Thread: DLPLCR4500EVM , Parts number : DLPLCR4500EVM. Is it possible to provide the NC data (which shows the coordinates of the drill holes) and NC list (which correlates the code number from NC data…
    • Resolved

  • DLP4500 is projected in pattern mode, and the sequence of projection pictures is incorrect after the machine is switched on and off

    TI Thinks Resolved
    Part Number: DLP4500-C350REF Other Parts Discussed in Thread: DLP4500 , DLPC350 Usage: DLP4500 projection in Pattern mode, the number of projection images: 6 8-bit fringe images, of which 3 are combined into Index0 and the other 3 are combined into Ind…
    • Answered

  • DLP4500-C350REF: DLP4500 add image to firmware

    Resolved
    Part Number: DLP4500-C350REF Hi all, I'm using DLP Lightcrafter 4500 EVM and DLP Lightcrafter 4500 control software v3.1.0. And I want to add a .bmp file into the firmware. But it report the error as But my image is so what is the possible reason…
    • Resolved

  • DLP3010EVM-LC: I want to implement structured light-control for projecting 2D pictures,Is there any dlp that can be realized？

    TI Thinks Resolved
    Part Number: DLP3010EVM-LC Other Parts Discussed in Thread: DLP4500-C350REF , DLPC350 , DLPC300 , DLP4500 Dear engineer, hello! I am using DLP3010EMV-LC for structural light control，I found out that the structural light-control for internal patterns could…

  • RE: DLP4500NIR: DMD is not projecting patterns with no error messages

    Hello Mohamed, So I looked into D16 further in the schematic which you can find all the design files including the schematic here: https://www.ti.com/tool/DLP4500-C350REF D16 is a RED LED that is controlled through FETs by POSENSE signal. Here is a quick…
    • Answered

  • DLP4500-C350REF: Does any problem happen when DLPC350 port 1 port 2 inputs won't be existed in TI GUI operation?

    Resolved
    Part Number: DLP4500-C350REF Other Parts Discussed in Thread: DLPC350 Dear All, My customer will start to develop 3D measurement projector it based on TI LightCradter4500 reference design. They won't use both DLPC350 port1(parallel) and port2(FPD-LINK…
    • Resolved

  • RE: DLP4500: Stopped working after using to much voltage

    Hello Daniel, Welcome to the E2E forums and we hope to assist you with your questions. So when you tried out a 12v power supply was it not able to power on? What current amp rating was your 12v power supply? There is normally a green heartbeat sensor…

  • DLP4500-C350REF: Schematic and BOM version of purchased EVM

    TI Thinks Resolved
    Part Number: DLP4500-C350REF Hi I have a LightCrafter4500 EVM, and I can see the schematic and BOM at this link: http://www.ti.com/tool/dlp4500-c350ref But how do I know what revision of the schematic and BOM, the LightCrafter4500 EVM I have is? Thanks…
    • Answered

  • DLP4500-C350REF: Timing artifacts

    Resolved
    Part Number: DLP4500-C350REF Dear TI professionals: I am using DLP4500-C350REF to generate rectangular wave forms. I do this by using the pattern sequenc mode and feed in a 24bit 60hz video file that alternate between on/off states. Since there are 24…
    • Resolved

  • RE: DLPC350: Increase the buffer size

    Hi Danilo, Below is the current implementation of the buffer which is internal to the DLPC350. I am not sure if everything can be reconfigured to work with an external system such as a beagle bone board. Is the customer following this reference design…

Didn't find what you are looking for? Post a new question.