Part Number: DLP4710EVM-LC Other Parts Discussed in Thread: DLPC3479 Hello, I am currently working on a project that requires me to keep only one LED ON, (say the blue LED), while keeping the red and green LEDs turned off. Additionally, I need to set both…
Part Number: DLP4710EVM-LC Other Parts Discussed in Thread: DLP4710 , DLPC3479 hello ma'am or sir, You know that we are developing back-end interactive products based on DLP4710 DMD. Our ultimate goal is to make a home projection product based on DLP4710…
Part Number: DLP4710EVM-LC Hi Team,
Light Control Evaluation Module part number DLP4710EVM-LC. I would like to know the pinout of the DMD Flex connector which is J22 DMD CNNT.
Thank you.
-Mark
Part Number: DLP4710EVM-LC Hi Experts,
Our customer has a concern regarding their purchase order, while they were operating the device, they turned off and unplugged the USB connector from the board; nevertheless, the USB connector and its lanes and pads…
Part Number: DLP4710EVM-LC Dear,
I brought a set of DLP4710EVM-LC device from Mouser (mouser.cn) on March 23rd, but a device problem happened within a month. When the device was powered on, the display screen is error, the left half cannot display picture…
Part Number: DLP4710EVM-LC Other Parts Discussed in Thread: DLPC3479 Hello TI,
Regarding DLP4710EVM-LC/DLPC3479, I'd like to know a sample code(using cypress-infineon API) how to write the firmware itself into SPI flash.
I couldn't find the clue(how…
Part Number: DLP4710EVM-LC Hello Forum,
I’m currently using this projector for 3D reconstruction in large volumes, so I need to project at 1.75 mts and 2.75 mts away.
By specs the RGB LED optical engine from Young Optics has a 476lm @ 35W or 605lm…
Part Number: DLP4710EVM-LC Other Parts Discussed in Thread: DLPC3479 Hello everyone! I'm currently trying to display a sequence of 2D pattern images as splash frame, because I'm aware that my DLPC3479 only support 1D high-speed pre stored pattern display…
Part Number: DLP4710EVM-LC I have a DLP4710EVM-LC Light Control Evaluation Module. It appears to be faulty because there is no projector output and the correct LEDs do not illuminate. It worked for about 10 minutes and then stopped working. Details of…
Part Number: DLP4710EVM-LC Hello Forum,
I was trying to use the trigger out 2 to synchronize the splash pattern streaming and an external PoE camera acquisition (external trigger in).
I looked into the EVM documentation and there is two hardware configurations…