Part Number: DLP670S Other Parts Discussed in Thread: DLPC900 Tool/software: Hello, Ti expert!
I asked the question before, that is, I need to use the refresh rate of 15HZ, which has been used stably in the project. However, several different refresh…
Hello James,
That's great to hear you have it working!
I think this is your work-around for the time being. Please note that this is the easiest way to produce a single trigger-in connection and if your final board can be modified to offer this as…
Part Number: DLP670S Tool/software: Hi,
I am working on the 3D printer design based on the DMD chips. I now have two DMD chips, the DLP 6500 and DLP 670s. When I tried to illuminate the DMD with the light, I found some differences that I would like to…
Hello Junfa,
That's great! We will include this EDID in the REF-SW installer in the next release. Kindly mark the thread closed.
Thank you,
With regards, Aishwarya
Part Number: DLP670S Tool/software: Hi TI, I have a question about the refreash rate of DLP6750Q1EVM. As you may know, it is limited 30Hz in HDMI. I would like to know why it's limited 30Hz. Could you explain the technical reason and the back ground…
Part Number: DLP670S Other Parts Discussed in Thread: DLPLCRC900DEVM Tool/software: Hello!
I am in the process of setting up a DLP6750EVM Phase Light Modulator. Unfortunately, the DLP Lightcrafter software is unable to switch to Video Pattern mode, citing…
Hi che evg ,
I talked with my coworker, and he said that, due to jitter, we can probably expect around a 5 us or so shift in timing due to jitter. This looks like 18 us total, which should normally be okay.
My colleague also mentioned that you should be…
Part Number: DLP670S Other Parts Discussed in Thread: DLPC900 , DLPLCRC900DEVM Hi TI,
I'm trying to boot up DLP6750Q1EVM for PLM evaluation.
I turned on the mirror bias supply which is about 1.32V first and then did the main power 12V.
The lightCrafter…
Part Number: DLP670S Other Parts Discussed in Thread: DLPLCR67EVM , DLPLCRC900DEVM , , DLPC900 , TPS65145 , DLPR900 I was testing the DLPLCR67EVM kit with DLPLCRC900DEVM and the DMD isn't working (not showing images).
Currently, the DMD cannot properly show…
