Part Number: DLP7000 When I first power on the DMD (DLP 7000) with the on switch, I see a horizontal line across the display, even as it cycles through test patterns without connection to a computer. I am using the DLP Discovery 4100 kit and I've switched…
Part Number: DLP7000 There appears to have been several requests over the years for a DMD device that extends past 2.7um out to 5um. There is both experimental and theoretical applications of DMD's being used beyond 2.4um in the literature ( https…
Hello again Richard,
If the version on the PROM is DISCO3000-004 then a newer DLP7000 or DLP7000UV will work in the system, but will only run at 1xLVDS speed - 100 MHz clock (limited by the controller).
Fizix
Part Number: DLP7000 Hello,
As you mentioned in the thread “e2e.ti.com/.../dlp7000-how-to-achieve-maxim-pattern-rate-for-dlp7000-8bit-greyscale”, the one of the illumination modulation is as follow:
MSB -- on for 8 * 43 µs
MSB - 1 -- on…
Part Number: DLP7000 Hi,
I've seen that someone has already asked a similar question relating to using some optics to demagnify the image from the DMD down and pass it through a Microscope Objective onto a sample. I am also using a Continuous Wave Laser…
Part Number: DLP7000 Hi Experts, Good day. Our customer is using DLP7000, and the laser is using 532nm, and they want to do single-pixel imaging . Now they have some problems, why does the checkerboard grid reflected from the DMD have petal-like shapes (as…
Part Number: DLP7000 Dear technical team,
We are using a DLP7000 by projecting it with a collimated laser beam (7mm of diameter). In our application, we are switching multiple ‘On' state patterns(1-bit binary patterns in one sequence) at different position…
Part Number: DLP7000 Other Parts Discussed in Thread: DLPC410 Hello E2E,
Our customer is interested in the DLP7000 device and has a question about options for uploading images in real-time to the device. From the literature, the customer understands that…