Part Number: DLP9000X Other Parts Discussed in Thread: DLPC910 , , DLP9000 , DLPC900 , Tool/software: Hello , We are woking on the lithography. Our requirement of wavelenth is either 365 or 405 nm. Our plan is to use DMD for the lithography (RDL pattern…
Part Number: DLP9000X Other Parts Discussed in Thread: DLP9000 Hello,
My customer is developing a board using the DLP9000X.
When using DLP9000X, is it mandatory to use the Housing Mating Connector below?
Is it possible to mount the DLP9000X device directly…
Part Number: DLP9000X Other Parts Discussed in Thread: DLPC910 , Hello
I'm designing a board with DLP9000X include DLPC910 and DLPR910, which of the components should powered on first the DLP9000X or DLPC910?
thanks
DLPLCR9000_DMDBOARD_P9_WQXGA_TYPE_A_1 (1).pdf
I am referring to page 4 of the attached schematic.
During normal Enable OFF condition, Why do we need to connect VOFFSET to Zener via 12 ohm resistor.
Thanks,
Muni
Part Number: DLP9000X Other Parts Discussed in Thread: DLP9500 , Hi TI's everyone,
Regarding " ENVIRONMENTAL For Illumination Source Between 400 nm and 420 nm" in the datasheets of DLP9000X and DLP9500, DLP9000X's illumination is maximum 10W/cm2…
Part Number: DLP9000X Hello,
I am designing a circuit to work with the DLP9000X. I am basing my schematics on TI EVB schematics (attached). on those schematics, there are circuits to for the power down procedure of the DLP9000X.
My questions are: 1. I am…
Part Number: DLP9000X Other Parts Discussed in Thread: DLPC910 , Hi Team,
Our customer would like to confirm if the analog signal for synchronizing with light source is available in DLP9000X. As I understand, light is controlled with DLPC910. Can you please…
Part Number: DLP9000X Other Parts Discussed in Thread: DLPC910 Hi,
In order to test FPGA design that works with DLP9000X I'm looking for compatible EVM with programable FPGA + source code for the FPGA.
is there any EVM that will support my needs?
thanks…
Part Number: DLP9000X Other Parts Discussed in Thread: , DLP9000 , DLPC900 Hi,
We have DMD devices with DLP9000X and DLP9000XUV chips (V-9001 and V-9001UV, ViALUX). When doing the calibration of grayscale, we found that the output power is not proportional…
Part Number: DLP9000X
Hello, I am using DLP9000X. My problem is that the DMD is not perceived on my computer.
It worked a month ago, so I do not know that the it started not working after windows updates.
Even if it is connected to my comp, it is not…
