The only ones I've found that fit the bill are the combo of:
DMD: DLP301S
Controller: DLPC1438
PMIC: DLPA2000
But AFAIK these aren't available in EVM format, and I suspect that the design effort required to get these running would exceed what I…
Part Number: DLPA2000 Other Parts Discussed in Thread: DLPC3430 , DLP2010 , DLPA3000 Hello,
I'm almost done with the board with MIPI-DSI interface I asked about earlier.
My application uses the DMD in an custom optical package, illuminated by a single…
Part Number: DLPA2000 Other Parts Discussed in Thread: DLP2010 , DLPC3430 , , DLPC3435 , DLPA2005 Hello all,
I am a proud owner of the DLP2010 and DLPC3430 in the specification of the DLP2010 (Revised July 2016) it is stated, that also a
DLPA-Driver is needed…
Part Number: DLPA2000 Hello,
The maximum LED current we are aiming for is only ~300mA. However, transitioning between Red, Green, and Blue, there are huge input current spikes (1.5A) since the buck-boost is trying to fill the output capacitors as fast…
Part Number: DLPC3478 Other Parts Discussed in Thread: DLPC3470 , DLPA2000 , DLP3010LC , I have a special build of the firmware that does not drive the LEDs. DLPC3478_DLPA2000_DLP3010LC_noLED_8.1.1.img. Everything works fine using the internal patterns I created…
Part Number: DLPA2000 Hello ,
1. we need please some piratical links and info for "HUD" , head up board to project the image on a car glass for the DLP .
2. what type of materials is best to use (for low cost mass production 10k) and parameters…
Part Number: DLP3010 Other Parts Discussed in Thread: DLPC3433 , DLPA2005 , DLPA2000 , DLPC3438 Currently using DLPC3433, DLPA2005, DLP3010
Needing to get brightness to a very low limit of 0.01fL to 50fL. We are using a projector system to project through…
Part Number: DLPA2000 Other Parts Discussed in Thread: CC3200 Hello ,please your advice
both project rs is 320x480 is o.k
1. we need to develop a glasses with virtual image in the field of view of the user
1.1 what chip should i use is there any reference…
Other Parts Discussed in Thread: DLPC3430 , DLPA2000 , DLPC3435 , DLPA2005 Hello,
We are designing custom board of DLPC3430 + DLPA2000 projection system referenced by LightCrafter Display 2010EVM. Therefore, our board is exchanged from DLPC3435/DLPA2005 on…
Other Parts Discussed in Thread: DLP2010 , DLPA2005 , DLPA2000 DLP2010 EVM comes with DLPA2005 board. Anyhow we would need to use the motor control signal that comes only with DPLA2000.
Where to obtain DLPA2000 board that fits to DLP2010 baseboard? Or is…
