Part Number: DLP2010LC Other Parts Discussed in Thread: DLPC3470 , DLPC-API Hi Experts,
When using the the Flash Update Commands to update internal pattern data with 9.0.1 FW, i2c write operation will always fail after the third write pattern data…
Hello Maximus,
Thanks for your reply.
I can't communicate with dlpc via DLP EVM GUI on my side, there is only one way of IIC communication;
My question is: Can I refer to the load pattern to flash iic command in the dlpc347x_dual_samples.c file…
Hello Tong,
I would suggest you to look into https://www.ti.com/tool/DLPC-API and refer to the DLPC3479 sample code. We would suggest that is the approach you should take to address your query.
Regards,
Mayank
Hello User,
Have you tried to use DLPC-API intended to control the DLPC34xx chipset? If not, I would recommend you to start exploring and using the DLPC-API .
The sample code is in C language routines and these routines can be used to configure and…
Part Number: DLP3010EVM-LC Other Parts Discussed in Thread: DLPC3478 , , DLPDLC-GUI Dear Members
I am checking the function of TI GUI Tool before developing the scanner.
After finishing "Program and Load pattern" without Errow or Waring message…
Part Number: DLPC3478 Tool/software: Hello,TI team We know that DLPC3478 firmware has been updated to version 9.X, and it needs to match GUI version 3.2.X or above before it can be used normally. In version 9.X of DLPC3478 firmware, a parameter PatternSetEntryIndex…
Hello Megan,
Thank you for your patience.
The DLP4710LC EVM is based on DLPC3479 controller and DLP4710LC DMD. The EVM has USB port and DLP GUI uses this USB interface to control and communicate with EVM. You need to use same USB interface to control…
Hello Wang Huai,
Welcome to the E2E forums and we hope to assist you with your questions.
We do not have python package but you can find our API information here:
https://www.ti.com/tool/DLPC-API
You can also find our DLPC3437 programmers guide…
Hello CSC,
Yes, an API for the 34xx controllers can be found on the DLPC-API page . Please note the User's Guide linked on the same page for instructions on use.
Regards, Austin
