Part Number: DLPC150 Other Parts Discussed in Thread: DLPC3435 , DLP2010 , , DLP2010NIR Hi team,
My I ask that can DLPC3435 pin to pin replace DLP150?
Thank you.
Ivy
Part Number: DLPC150 Other Parts Discussed in Thread: DLPC350 1. Can flash be programmed from the DLPC150 by commands issued through the I2C interface? If so, what commands should be used?
2. Is there an equivalent mode in the DLPC150 like Mode 1 in the…
Part Number: DLPNIRSCANEVM Other Parts Discussed in Thread: DLPC150 We have purchased two DLPNIRscanNANO devices for development, but one of them produces very noisy results (a periodic spike in the scans). We have narrowed it down to the TIDLP-23327 DLPC150…
Part Number: DLPC150 Other Parts Discussed in Thread: TFP401 Hi,
We are trying to program the DLPC150 through its I2C port. So far we were able to switch between internally generated test patterns, now we are trying to display external patterns through…
Part Number: DLPNIRNANOEVM Other Parts Discussed in Thread: DLPC150 , DLP2010NIR , DLPC3470 , DLP3021LEQ1EVM , DLP4500 Hello!
I saw that DLPNIRNANOEVM lacks RGB LED control.
1. Can you tell me if the DLPC150 controller in the DLP2010NIR demo board works in…
Part Number: DLPC150 Other Parts Discussed in Thread: DLP2010NIR , , DLPA2005 I am trying to get 2880 Hz binary pattern display using 24-bit parallel with the dlpc150 and dlp2010nir. In section 8.1 of the DLPC150 datasheet "Pattern Generation Mode" is described…
Part Number: DLPC150 Other Parts Discussed in Thread: DLPA2005 , Hello,
I created a custom PCB with the DLPC150 and DLPA2005 and I have a question about the normal I2C behavior upon startup. The behavior I am currently seeing is upon powering up my board…
Part Number: DLPC150 Other Parts Discussed in Thread: DLP2010 , DLP2010NIR Is the DLPC150 firmwarev2.3.0 available to download? If so where can I find it?
Also will DLP2010 devices be compatible both v2.2.0 and v2.3.0 FW or does it depend on when they…