Search tips
Showing 67 results View by: Thread Post Sort by

  • DLPC230-Q1: Can not connect to DLP5530-PGU-Q1-EVM

    Part Number: DLPC230-Q1 Hi, we have bought a DLP5530-PGU-Q1-EVM, and it works well before. But error occurred when I try to connect it today, using DLPC230 Control Program 1.8 Build 1242. And no image projected when powered on. So, can you locate the…
    • Answered

  • DLPC230-Q1: How to program flash for a fresh PCB

    Resolved
    Part Number: DLPC230-Q1 Other Parts Discussed in Thread: DLP4620S-Q1 , TPS99000 Hi, our department is designing PGU for HUD with DLP4620S-Q1, and we have finished creating a freash PCB of the PGU EVM. Now we are going to test the PCB, and we have severial…
    • Resolved
    • Answered

  • DLPC230-Q1: I/O Low-level output current

    Resolved
    Part Number: DLPC230-Q1 Hi, According to figure 1, the test condition is IOL = Max rated , and the Low-level output voltage is no more than 0.4V. According to figure 2, Low-level output current has a minimum value. My question is why a minimum value is given…
    • Resolved

  • DLPC230-Q1: Advance settings in DLPC230 ACP

    TI Thinks Resolved
    Part Number: DLPC230-Q1 Hello- I'm testing the role of several parameters in the Advanced Settings in the new version of DLPC230 ACP(1.60.0.4 specifically). But I didn't understand what the 'ignore sweep data point' option does, can you tell me?…

  • DLPC230-Q1: Error in auto-calibration of CMD for DLPC230

    TI Thinks Resolved
    Part Number: DLPC230-Q1 Hi, we performed the auto-calibration for our PGU by CMD, but there always occured the errors as shown below, making the calibration failed. we have tried to change the Coarse Combination and increase the Margin in 'Advanced Settings…

  • DLPC230-Q1: Current offsets in LM3409Calibration

    TI Thinks Resolved
    Part Number: DLPC230-Q1 Other Parts Discussed in Thread: LM3409 Hi, We performed the Temperature sweep and Unit sweep for our PGU by DLPC230, and then found something different by comparing the .sweep file of them. We found LM3409offsets present in both…
    • Answered

  • DLPC230-Q1: How to change mode from standby to display without using DLPC230 ACP?

    Resolved
    Part Number: DLPC230-Q1 Hi Everyone I connect all hardware , the PGU is bright in display mode. I keep DLP230 power on，reset the MCU, PGU is turn to black,the mode change to standby,and i must open the DLPC230 ,switch the Standby mode to Display mode and…
    • Resolved
    • Answered

  • DLPC230-Q1: short status error in auto-calibration of DLPC230 Control Program

    Resolved
    Part Number: DLPC230-Q1 Hi！we performed the auto-calibration in DLPC230 Control Program for our PGU, but there always occured the same error as shown below, resulting in the failure to auto-calibration. We have't been able to solve it, i want to kown what…
    • Resolved
    • Answered

  • DLPC230-Q1: DLP Automotive Head-up Display

    Resolved
    Part Number: DLPC230-Q1 Hi, we expect to get the access for the Calibration algorithm of DLPC in my secure resource. Currently, we only find calibration algorithms related to the DLPC120，Can you open up the access for the DLPC230 calibration algorith…
    • Resolved

  • DLPC230-Q1: How to get access to the complete version of the DLPC230 Control Program with full features and auto-calibration features which are not available in the Lite version

    TI Thinks Resolved
    Part Number: DLPC230-Q1 Other Parts Discussed in Thread: DLP5530PGUQ1EVM As shown in https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/1077842/faq-dlpc230-q1-dlp-auto-hud-gen-2-resources-and-documentation : t o control the EVM and general…

Didn't find what you are looking for? Post a new question.