Part Number: DLPC231S-Q1 Dear team,
What is included in the calibration data mentioned in datasheet 7.3.9? If in actual production, DMD and controller are not on the same PCB, how can we avoid pairing confusion after calibration?
Best, …
Part Number: DLPC231S-Q1 Other Parts Discussed in Thread: DLPC231-Q1 , , DS90UB948-Q1 Dear teams,
Can the LVDS signal of DS90UB948TNKDTQ1 be directly connected to the OpenLDI (FPD Link I) interface of DLPC231-Q1? If possible, are there any precautions…
Part Number: DLPC231S-Q1 Other Parts Discussed in Thread: DLPC8445 , DMD_LS0_RDATA, DMD_LS1_RDATA are single-ened signals.
Does they have impedance matching requirement on PCB design?
When I use DLPC8445, it has a impedance requirement of LS signals…
Part Number: DLP3940S-Q1 Other Parts Discussed in Thread: DLPC231S-Q1 , Hello TI Team,
We are developing a system with the DLP3940S-Q1 DMD and DLPC231S-Q1 controller. The zhcszf6 documentation indicates that quincunx processing can achieve a frame resolution…
Part Number: DLPC231-Q1 Dear teams,
In the reference design DLP121E2_SCH_20260311.pdf , TPS99002S has NTC resistors for temperature acquisition and feedback of LED, but the complete model of NTC resistor is not reflected in the design. Can you help…
Part Number: DLPC231S-Q1DLPC231S-Q1 datasheet said GPIO marked yellow is reserved for Future use and external pull down resistor is needed.
As I know, this chip release was so long and those GPIOs are not used until now, and we don't use those GPIOs…
Part Number: DLPC231S-Q1
I checked the video timing in DLPC231S-Q1 datasheet.
Input video signal need to be stable, but as you know, in real vehicle environment is not always stable.
So I needs tolerances of every factor.
(H, V resolution, H sync…
Part Number: DLP3940S-Q1 Other Parts Discussed in Thread: DS90UB948-Q1 , DLPC231-Q1 , TPS99000-Q1 Hi TI Experts,
We are developing a system with the following chipset: - Deserializer: DS90UB948-Q1 (single FPD-Link III input) - Controller: DLPC231-Q1…
