Search tips
Showing 324 results View by: Thread Post Sort by

  • DLPC3478: DLPC3478 Connection issue after trying to run internal pattern through DLP API

    TI Thinks Resolved
    Part Number: DLPC3478 Other Parts Discussed in Thread: DLP3010 , , DLPA3000 , DLP3010LC Hello, We are trying to project internal patterns using a DLP3010 with a custom board that includes DLPC3478 along with DLPA3000. We used it without any issues for…

  • DLPC3478: Flash update commands

    Part Number: DLPC3478 Other Parts Discussed in Thread: DLPC3470 , DLPA2000 , DLP3010LC , I have a special build of the firmware that does not drive the LEDs. DLPC3478_DLPA2000_DLP3010LC_noLED_8.1.1.img. Everything works fine using the internal patterns…

  • DLPC3478: Firmware update method using DLPC API

    TI Thinks Resolved
    Part Number: DLPC3478 Other Parts Discussed in Thread: DLPC3479 Hi, team I wonder if it is possible to update FW (.img) using the DLPC API. I tried using the sample code, but It doesn't work well. I am trying using the code below. Is this…
    • Answered

  • DLPC3478: DLPC API can changes the pattern order entry?

    Resolved
    Part Number: DLPC3478 Tool/software: Hi, I try to write pattern sets and pattern order entry using DLPC API 1.1 dlpc347x_samples.c. when I using GUI, completely success change pattern sets and their configurations. I use DLPC API that change…
    • Resolved
    • Answered

  • DLPC3478: I2C input hysteresis?

    Resolved
    Part Number: DLPC3478 Other Parts Discussed in Thread: DLPC350 The data sheet states that the input of the I2C (e.g., IIC0_SCL) of the DLPC3478 is hysteresis. However, its level is not prescribed. The DLPC350 data sheet states VHYS(VT+ - VT-)=550mV…
    • Resolved

  • DLPC3478: Pattern handling in internal streaming mode

    TI Thinks Resolved
    Part Number: DLPC3478 Hi, I am setting up a new system with light control internal streaming mode. Finally I want to project 12 subsequent vertical pattern with 8 bit monochrom resolution each. I noticed that they will not fit into 1 pattern set for…

  • DLPC3478: Regarding the delay time that occurs when converting pattern data in DLP3478 Trigger in mode.

    TI Thinks Resolved
    Part Number: DLPC3478 Other Parts Discussed in Thread: DLP3010 , , DLPA2005 Tool/software: Hello. I am developing a product by customizing DLPC3478+DLPA2005+DLP3010. I have two issues to inquire about. Issue 1. I am controlling the internal…
    • Answered

  • DLPC3478: HOST_IRQ signal stays high

    Resolved
    Part Number: DLPC3478 Other Parts Discussed in Thread: DLPA300 , , DLPA3000 , DLP3010EVM-LC Hi, I designed a custom board with DLPC3478 and DLPA300 for DMD3010. I used W25Q32 as firmware flash and STM32 to flash the firmware and control the DLPC3478…
    • Resolved

  • DLPC3478: Inquiries on DLP3010 & DLPC3478

    Part Number: DLPC3478 Hi team, Customer has a issue I only use Blue LED. I researched the SDK interface for a day. And I want to re-describe my problem in a technical way. In your official interface "DLPC-API-1.10/api/dlpc34xx.h", I only found…

  • DLPC3478: Which bus is used to load the firmware using the DLP®︎ EVM GUI Tool

    TI Thinks Resolved
    Part Number: DLPC3478 Other Parts Discussed in Thread: DLP3010EVM-LC Tool/software: Hello! Is firmware data transferred over the I2C bus of DLPC3478 for firmware upgrade or backup using the DLP® EVM GUI Tool? Or does it read and write data directly to…

Didn't find what you are looking for? Post a new question.